This might help,
http://www.airnewzealand.co.nz/before-you-fly/baggage/oversized-items.htm#lengthrestrictions
Glue one end on the tube with pvc cement(like what plumbers use) and at the other screw top end find a bolt long enough to go through and drill a hole in it so you can paddlock it on. Drill a hole through the top of the tube at a right angle slide the bolt through and padlock . Don't have to worry about light fingers or vibrations.
Moocha I've got a couple of tubes, You can borrow one for your trip if you want
Men In Black wrote:Heading over to Cape Yoke top of Aussie next week myself, I invested in one of the large adjustable Bazuka rod carry tubes. Have heard good and bad things about them regarding Airlines treating them rough and smashing things. Still it holds about 8 rods depending on what type was told to put each rod in a soft rod sleeve then a strip of bubble wrap around each rod in three places up the length so they don't vibrate and and bang together, if you want the guides in one piece. Also break down all 2pc rods and rubber band them together after putting them in a rod sleeve. |
phantomdeviant wrote:Glue one end on the tube with pvc cement(like what plumbers use) and at the other screw top end find a bolt long enough to go through and drill a hole in it so you can paddlock it on. Drill a hole through the top of the tube at a right angle slide the bolt through and padlock . Don't have to worry about light fingers or vibrations. Moocha I've got a couple of tubes, You can borrow one for your trip if you want |
Canals still the place for a monster trout I am sitting at my desk and... Read More >
Trophy snapper in close The snapper fishing out deeper continues to be the most consistent... Read More >
Swords aboard! With some of the smoothest seas and lowest winds we have seen in... Read More >
Kingfish and snapper in the bay Having spent the week weighing kingfish, I decided that... Read More >