Boyo wrote:Earlier on in this thread Sufishent offered me the recommended best settings for an Elite 5 HDI. I had pm'd him but he hasn't got back to me with them yet. |
Best Elite 5/7-HDI Broadband Sounder
Settings
Step 1:
Press menu twice and go to sonar, change fresh water setting to general.
Step 2:
Press pages and select full sonar screen
Step 3:
Leave sensitivity and range in auto
Step 4:
Leave frequency in 200kHz, but you may want to run dual frequency so change to
83/200kHz
Step 5: Ping
speed - Fastest
Step 6: Sonar
Options – Noise rejection and surface clarity – Low (Advanced mode will have to
be selected for this option to be available. You will have to press menu twice
and go into settings in the sonar menu to select advanced menu.
Step 7:
Sonar Options – Colour – Blue fish reveal
Note: If
customers want to sit in their boat and lean how to use the unit tell them to
select stop sonar when the unit is operating out of water with the transducer
plugged in. Remember to turn off stop sonar once finished.
DONE!!
Best Elite 5/7-HDI DownScan Sounder
Settings
Step 1:
Press pages and select full DownScan screen
Step 2:
Leave contrast and range in auto
Step 3:
Change frequency to 800kHz
Step 4: Ping
speed - Fastest
Step 5:
Downscan options – Noise rejection and surface clarity to low
Step 6:
Colour – Blue gradient
DONE!!!
Big spring snapper. With the more settled weather over the last couple of weeks there’s... Read More >
Snapper hit and miss. Most reports have been telling us it’s becoming more difficult to... Read More >
The switch has been flicked on! Call it what you want, El Niño, global warming,... Read More >
Snapper and kahawai in close. Again, we start on a positive note, with some nice... Read More >