Lowrance Elite 5 Chirp

Page  12>
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Topic: Lowrance Elite 5 Chirp
    Posted: 05 Nov 2015 at 12:05pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
Last year when I purchased my boat I negotiated an upgrade from the Lowrance HDS 5 that was on it to an Elite 5 Chirp. The performance of the device is not what I would expect from a Chirp sounder so I am wondering if the dealer I bought the boat from has simply changed out the sounder and re-used the transducer. Is there any way I can tell if the transducer is the right one and if not are there any good transducers you don't need a mortgage for to retrofit.
 
Cheers.
Back to Top
Post Options Post Options   Likes (1) Likes(1)   Quote Bay Marine Electronics Quote  Post ReplyReply Direct Link To This Post Posted: 05 Nov 2015 at 2:05pm
Bay Marine Electronics View Drop Down
Gold
Gold
Avatar

Joined: 03 Aug 2011
Status: Offline
Points: 601
The elite chirp are supposed to chirp the existing lowrance transducers, so the old transducer should work as well as the new one. The elite range is the entry level and the performance is not as good as the true chirp units we have seen. Which is probably to be expected given the price tag.

We have also had a couple of elite chirp units have a bung transducer from the box, so this is also a possibility.
0800 BAY MARINE www.baymarineelectronics.co.nz
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 05 Nov 2015 at 7:38pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
It does work after a bit of experimentation but not as good as the Garmin chirp model a mate has.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 02 Dec 2015 at 9:50pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
I have another question regarding my Lowrance Elite. When I first started using it I found I had to keep moving the cross lines (for lack of the correct description) to track the boat position. After awhile I stumbled upon a setting that allowed the boat travelling to track automatically but now unfortunately I have inadvertently changed the setting so that I need to move the cursor again. How to I set it to track automatically? Also how can I change the brightness level? 
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Muppet Quote  Post ReplyReply Direct Link To This Post Posted: 03 Dec 2015 at 5:49am
Muppet View Drop Down
Titanium
Titanium
Avatar

Joined: 26 May 2004
Location: NZ
Status: Offline
Points: 19245
Classic case of not reading instruction book? LOL Or have a play at home with it.

Press power button you should get brightness level on the window options that pop up.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Bay Marine Electronics Quote  Post ReplyReply Direct Link To This Post Posted: 03 Dec 2015 at 12:05pm
Bay Marine Electronics View Drop Down
Gold
Gold
Avatar

Joined: 03 Aug 2011
Status: Offline
Points: 601
On Chart page hit menu -> top option should be "return to vessel"

pushing the power button for a short push will cycle between backlight levels, holding it in turns the unit on/off


0800 BAY MARINE www.baymarineelectronics.co.nz
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 03 Dec 2015 at 2:24pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
Muppet -  Thanks for your reply. I was looking in the menus pages as I expected to find it as per the sample dialog on page 7 so I didn't notice it in the buttons description menu.
I spend my day every day resolving industrial breakdowns. I don't mind putting my hand up for advice to expedite a resolution - after all isn't that what this forum is all about. What was your pearl of wisdom regarding the position tracking?
 
Bay Marine Electronics - Thanks very much for your help! I'm pretty sure I went through all the Chart pages and didn't find a "Return to Vessel" option and there is nothing about it in the PDF I am looking at, at the moment. I will have another look in the device at home tonight. Keep up the good work!!!
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 11 Jan 2016 at 10:37pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
This one is for Bay Marine Electronics. Thanks very much for your last assistance. Since I have had my Lowrance I have experienced problems with failure of the sounder under passage then continued failure when stopped. Usually when the sounder has failed the last successful depth detection flashes on the screen. Sometimes it begins detection again but often I have to fiddle with settings and even power reset to achieve operation again. This is very inconvenient when approaching shallow channels. What can I do to overcome this?
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Bay Marine Electronics Quote  Post ReplyReply Direct Link To This Post Posted: 12 Jan 2016 at 10:41am
Bay Marine Electronics View Drop Down
Gold
Gold
Avatar

Joined: 03 Aug 2011
Status: Offline
Points: 601
You could have  a number of things wrong - possibly transducer placement, possibly faulty transducer or a bad connection. The flashing depth means it is searching for the bottom, so the range will be changing until it finds the bottom again, which can take some time even in perfect conditions. You can get around this by using the unit in manual range (if you know the approximate depth) which will speed up the time it takes to find the bottom again.
0800 BAY MARINE www.baymarineelectronics.co.nz
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 12 Jan 2016 at 12:16pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
Once again, Bay Marine Electronics, thanks for your helpful assistance. What would be the ideal transducer placement?
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Big Manly Yaka Quote  Post ReplyReply Direct Link To This Post Posted: 12 Jan 2016 at 12:19pm
Big Manly Yaka View Drop Down
Platinum
Platinum


Joined: 24 Nov 2011
Location: Hibiscus Coast
Status: Offline
Points: 1821
Ive recently replaced my Elite 4x standard 83/200 with a new Chirp unit (old one was faulty) and kept the same standard transducer. I have been out half a dozen trips now and its seems to work ok in Chirp mode, maybe a little better in Medium Chirp than High, but to be honest I've ended up going back to the standard 200Hz. When I was running it split screen 200/Chirp the Chirp side would quite often not pick up a lot of the sign that the 200 would.
Maybe I don't know what I'm doing with it but I'm quite happy just running it on the 200 at the moment.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Sufishent Quote  Post ReplyReply Direct Link To This Post Posted: 12 Jan 2016 at 1:20pm
Sufishent View Drop Down
Platinum
Platinum
Avatar

Joined: 16 Apr 2007
Location: Browns Bay
Status: Offline
Points: 1490
I've got an Elite 5 HDI (previous model). Have a perhaps similar (quirky) issue - when in Auto depth mode the sounder sometimes gets confused in "wash" type conditions eg reversing, crossing wakes, aerated water and loses contact with the bottom. To resolve the problem Lowrance recommend putting the sounder into a Manual depth setting suitable to maximum depth - the sounder then "re-finds" the bottom and then its back to normal. Fix has worked well for me.

Have a page of Lowrance recommended "best settings" - if you send me a PM with your email address I'll send it to you. 
You can never have enough fishing tackle
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 14 Mar 2016 at 10:27pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281

Bay Marine Electronics here is another problem I need your assistance on with regards to my Elite 5 Chirp. Recently when I turn it on I cannot acknowledge the start up messages and, of course, because they are still present I can't move on to the menus. I know that the software is out of date as I have downloaded the new version which has a newer version number than that loaded in my device. I thought I would update the software to help resolve my start up issues but it says on the Lowrance website that you need to down load the new version onto a micro SD card that is not bigger than 2GB (where the hell do you get one that size now days), the smallest I could get is 4GB. I tried loading the new version to my device from my 4GB card but it did not work. So I tried reformatting the SD card to FAT system instead of FAT32 but that hasn't worked either. Can you offer any advice - is my start up problem resolvable by updating the software and how can I do it without a 2GB SD card.

As always your help is gratefully accepted. 

Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Bay Marine Electronics Quote  Post ReplyReply Direct Link To This Post Posted: 15 Mar 2016 at 8:50am
Bay Marine Electronics View Drop Down
Gold
Gold
Avatar

Joined: 03 Aug 2011
Status: Offline
Points: 601
In the past we have just bought old cards off trademe when we need a small size, its the cheapest and easiest way to get around that problem, but I realise it wont be available forever!
0800 BAY MARINE www.baymarineelectronics.co.nz
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 15 Mar 2016 at 9:32am
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
A friend at work has come up with a couple of smaller cards to try so I'll let you know how I get on. To be honest I have just about had enough of this product and I am about ready to move on. What other brand would you recommend?
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Chip'n Quote  Post ReplyReply Direct Link To This Post Posted: 15 Mar 2016 at 10:44pm
Chip'n View Drop Down
Gold
Gold


Joined: 15 Feb 2008
Location: Papamoa
Status: Offline
Points: 831
I bought a 2gb sd card from Jaycar electronics, but they had to get it in for me overnight from their main store. hope that helps.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 16 Mar 2016 at 4:17pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
Thanks for the suggestion Chip'n. I got it loaded on to a 256mb card and now the upgrade is done.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote out2sea Quote  Post ReplyReply Direct Link To This Post Posted: 02 Apr 2016 at 3:37pm
out2sea View Drop Down
Silver
Silver


Joined: 01 Feb 2015
Location: Auckland
Status: Offline
Points: 279
Does anyone have recommended or best settings to use for a elite 5 chirp to get best imaging I have the standard 83/200 455/800 Transducer. 

The only issue I have been having is the sounder losing the bottom at speed. I can find it again by manually selecting a depth range then going back to auto. I have tried moving the transducer up and down however it has not been able to completely eliminate the problem and it still happens every 5-10 minutes or at sudden depth changes this is the best I have been able to get it.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote mands Quote  Post ReplyReply Direct Link To This Post Posted: 02 Apr 2016 at 6:27pm
mands View Drop Down
Bronze
Bronze


Joined: 31 Mar 2016
Status: Offline
Points: 4
I have just been researching the Lowrance elite 7Ti and that can come with the TotalScan transducer. Will yours will with that? Seems to be the better transducer than the stock std package
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Boyo Quote  Post ReplyReply Direct Link To This Post Posted: 02 Apr 2016 at 11:45pm
Boyo View Drop Down
Silver
Silver
Avatar

Joined: 03 Nov 2014
Location: Hamilton
Status: Offline
Points: 281
Earlier on in this thread Sufishent offered me the recommended best settings for an Elite 5 HDI. I had pm'd him but he hasn't got back to me with them yet.
Back to Top
Page  12>
Forum Jump
Forum Permissions View Drop Down


This page was generated in 0.125 seconds.

Fishing Reports Visit Reports

Saltwater Fishing Reports
Raglan Fishing Report - 12/11/26

Big spring snapper. With the more settled weather over the last couple of weeks there’s... Read More >

12 Nov 2026
Saltwater Fishing Reports
Mercury Bay Fishing Report - 12/11/26

Snapper hit and miss. Most reports have been telling us it’s becoming more difficult to... Read More >

12 Nov 2026
Saltwater Fishing Reports
Northland Fishing Report - 12/11/26

The switch has been flicked on! Call it what you want, El Niño, global warming,... Read More >

12 Nov 2026
Saltwater Fishing Reports
Tauranga Fishing Report - 12/11/26

Snapper and kahawai in close. Again, we start on a positive note, with some nice... Read More >

12 Nov 2026
Fishing bite times Fishing bite times

Major Bites

Minor Bites

Major Bites

Minor Bites