riga wrote:You might need to do some research on what pin connection the CX44 had and what pin connection the HDS has. If you are lucky you might be able to buy an adapter cable. Worst case you will need to buy the connection for the HDS and then cut the connection of the TM260 and re splice the correct wires back together. A mate of mine has done this multiple times with his units in the past and has always worked well. |
Snapper, cod and marlin on the menu Despite the weather we have had recently, when... Read More >
Snapper out deep in cooler water As happens at this time of the year, the... Read More >
Small snapper the norm Over the last 10 years I have noticed with great concern the... Read More >
Fishing will be exceptional when water clears The massive amount of rainfall to hit the... Read More >