Which hardtop?

Page  12>
Post Options Post Options   Likes (1) Likes(1)   Quote offcut1 Quote  Post ReplyReply Direct Link To This Post Topic: Which hardtop?
    Posted: 08 Jan 2018 at 1:33pm
offcut1 View Drop Down
Bronze
Bronze


Joined: 21 Dec 2011
Status: Offline
Points: 82
So, Im looking at upgrading to an alloy hardtop. Around the 5.7m mark. The main contenders at the moment are Senator RH580, Surtees 575, DNA 570 XHT and Frewza F18. 

I was pretty set on a pontoon hull, mainly for the stability at rest and extra buoyancy if it all goes pear shaped. Obviously the downside is ride quality and extra weight. Thats why the Surtees is in the mix. 

They all seem to be fairly similar in price, apart from the Frewza, which is a bit cheaper. 

If Im honest, I like the look and finish of the Surtees the most. But, Ive never had anything to do with them. Is the flooding keel effective? I hate boats that slop around at anchor. Most of my boating is in fairly choppy conditions so ride quality is important. 

Anyone out there who has experience with any of these boats and can give a comparison? Specifically, ride quality, build quality and stability at rest. 

Cheers
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote paul_fishing Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 2:10pm
paul_fishing View Drop Down
Bronze
Bronze
Avatar

Joined: 20 Dec 2014
Location: Palmerston N
Status: Offline
Points: 69
Hi Offcut, I suggest you to go for a ride all models in similar condition if you can. Surtees and Senator will give you different feelings due to different hulls.

I own a Senator RH580. It's been my pleasure so far. I took it everywhere in any condition. I smash the bar no matter how high the wave is. In a very choppy condition(talking 1.5m+ swell very short chop), you will never feel unsafe. You can still go relatively fast. Excellent stability at rest for pontoon. I have had 3-4 people on one side. It won't move too much. It is an excellent diving platform. The only thing I don't like is that you will get blown easily by wind. It is hard to do drift fishing cuz you will drift so fast. 

Also, consider the space. My 580 has lots of fishing room at the back. We fish 4 comfortably that everyone can move around. The 5.7m boat market can be quite different for the fishing space at the back even though it is the same size boat.

Hope this help
Cheers Paul
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Steps Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 2:59pm
Steps View Drop Down
Titanium
Titanium


Joined: 14 Oct 2013
Location: Franklin
Status: Offline
Points: 12854
l also suggest , check out the lay out.. what is best fort you.
 A 5.5/ 5.7m is not like say a 4.5 or even a 5m hull to walk around on... sure if 2 of 3 of your hang over one side, the boat will tilt over... And when under way, best to keep balanced to prevent  bad 'wheel alignment' pull to one side.
 But bottom line in my books, in retrospect... get the layout/storage space top of the list.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote CanadianJohn Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 3:36pm
CanadianJohn View Drop Down
Titanium
Titanium
Avatar

Joined: 03 May 2003
Location: east auckland
Status: Offline
Points: 5604
hey offcut,

i had the surtees 5.5 which is the same hull as the 575 from my understanding. mine had the smaller fuel tank which means bigger flooding keel capacity.

i have spent some time this year in a fyran 580 horizon hardtop. i wasn’t expecting much performance wise from it but i was wrong. i didn’t notice much difference at rest and underway to be honest. the fyran had a thicker heavier hull which probably helps it.

i loved the surtees and there is definately a difference at rest between when the keel is locked empty and flooded.
and there is definately a difference underway between when the keel is locked flooded and allowed to drain. and in my opinion THIS is the one definate thing i can say sirtees have over other boats tue same length and general weight.

Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote yellafin Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 3:44pm
yellafin View Drop Down
Gold
Gold


Joined: 17 Apr 2009
Status: Offline
Points: 682
If you can try a Aqualine 565 Hardtop by Kiwikraft. It has a deep V and fine entry like the Surtees with the added benefit of pontoons.
Goes very well in crappy conditions.

I think the DNA may be similar in specs. Don't know about the ride though.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote offcut1 Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 5:47pm
offcut1 View Drop Down
Bronze
Bronze


Joined: 21 Dec 2011
Status: Offline
Points: 82
Thanks for the replies guys. I see that Surtees also do a 5.5 hardtop now. Has anyone compared one to the 575? I’m in Christchurch and the dealer only has a 610 in the shop. I’m wondering how much deck space is lost by the 250mm drop.

The next question is what to put on the back. Probably looking at a 100 for the Surtees or a 115 for the pontoon boats. I’m looking for a boat for the next 20 years so long term reliability is more important to me than fuel efficiency. I’m between a Yamaha or a Mercury at the moment.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote CanadianJohn Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 6:10pm
CanadianJohn View Drop Down
Titanium
Titanium
Avatar

Joined: 03 May 2003
Location: east auckland
Status: Offline
Points: 5604
i had a merc 90 2 stroke on the 5.5. wouldn't think thats enough for the hardtop but the difference between that and 100hp would not be big. i assume you're talking 4 stroke as well? (i think i'm one of the few 2 stroke fans left around) so you lose a bit of bottom end power apparently. go the 115.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Schampy Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 8:34pm
Schampy View Drop Down
Platinum
Platinum


Joined: 14 Aug 2014
Status: Offline
Points: 1980
Hi offcut. Surtees all the way mate. They do it all and yes the ballest tank makes a real difference. 575 Compared to the 610 its narrower in the beam, Cabin is the same size.... you can overnight... but you need to rest your head on a chilly bin unless you are a Hobbit.
Obviously the 610 has it over the 575 in terms of ride and handling.... bigger, heavier boat is always gonna win. But theres not much in it -Considering the 25-30k price difference between the two... The 575 is great value for what you get. A 115hp 4 stroke will allow 30 mph cruising returning about 22 ltrs p/hr. Dont underpower the hull.... Surtees like plenty of hp.... especially if you fill the ballest tank... Go 115 if you can afford it. If I was to get another one (575) I would go for a 130.... screw the warrenty.
I cant comment on thee Senator as a comparison...They seem very well built and no doubt have it over the  Surtees when it comes to stability at rest. Like everyone says.... sea trial both. They both have there strong points.
I could sit here all night and rave on about pros and cons etc..... But this was an interesting comparison....
A couple of weeks ago we took 2 boats out to Port Jackson and Channel Island from Narrow neck beach Devonport, my 575 and a mate had a Fyran 6.0 around mid 2000 vintage. After a great day of fishing, spearfishing and cray diving we headed home. The wind had picked up to around 15-18 knts from sw. We locked the water into the ballest tank and settled into a 25mph cruise all the way to scallop spot at the noises.... around an hour. In that time the Fyran had dropped back so far behind they were not even visible... They were getting punished....I actually thought they had broken down.
Now....This is just an observation I made between the two boats... Im not bagging Fyrans....nor am I implying that a Surtees is vastly superior.... Just an interesting comparison made in real world conditions....and a 10 year differance between hull designs.
Here in NZ we really are spoiled for choice....so many great boats.....

 
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote offcut1 Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 9:16pm
offcut1 View Drop Down
Bronze
Bronze


Joined: 21 Dec 2011
Status: Offline
Points: 82
Hi Schampy,

Thanks for that. Interesting about the HP for a Surtees. I figured being lighter it could get away with a 100 but will price it on the 115 as well now. I like the pontoon boats for their stability at rest, but if the Surtees ride quality is a lot better in the chop that would sway me that way. The problem for me is getting a meaningful comparison. What we need is a demo day, where all manufacturers will give sea trials in the same conditions. The problem down south is that no one holds anything in stock. I might have to come up north for a couple of days and try to get on the water. Pretty good fuel numbers for you there. Im running a 75 merc on a 4.8m Zodiac and get about .9litre/mile so it sounds like Ill be saving on gas.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote shaneg Quote  Post ReplyReply Direct Link To This Post Posted: 08 Jan 2018 at 9:47pm
shaneg View Drop Down
Titanium
Titanium
Avatar

Joined: 12 Jul 2009
Location: New Zealand
Status: Offline
Points: 4948
Only my opinion .... but have spent time on 5.5 meter surtees (been to White Island 2 days in a row in one and fished a fair bit around gulf in one), It had a Honda four stroke 90hp on and seemed adequately powered. The surtees are capable craft. However a good pontoon boat, one that has a decent vee on it and is not too wide will deliver better sea keeping both at rest and underway in "all" sea conditions overall. Good pontoon boats are less prone to broach or bury nose particularly in large following seas, easier to quarter a head sea, slightly harder riding into a head sea with chop. For size pontoon boats are generally heavier by design hence not requiring flood chambers, the only real drawback is compromising beam internally and useable space in cabin and cockpit. And some say they are ugly.
My ride is a 17 yr old 490 stabi.. In most seas excepting completely flat sea it outperforms a surtees even the much bigger 5.5 mtr one but it lacks internal room ... basically a two person boat, some have said a very big Jetski
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Steps Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 9:35am
Steps View Drop Down
Titanium
Titanium


Joined: 14 Oct 2013
Location: Franklin
Status: Offline
Points: 12854
How well a hull performs , espec when in chop etc depends on how much reserve power there is to punch thru the next wave without slowing or falling off the plain... fully loaded
There fore is is very important to power well, which means .. like your wifes shopping basket car, will have a top speed way beyond what you will use or need...Fully loaded
 General rule of thumb for a 5/ 5.5 6m boat a top speed at best trim flat water  around low to mid 40 mph fully loaded will achieve this.
 Bare bones, 4 or 5 mph faster.
This will give a reasonable cruise speed on good flat ish water around the 30/32 mph in the 3800/ 4000 rpms range
The required power can be calculated for most boats as the hull designs for trailer boats are limited by the beam thu it must be noted the surtees does require more power due  to hull design to achieve the same expectations

There is little difference these days (modern alloy boats now have thicker hulls ) between most glass and alloy boat weights.
 Go at least the max spec hp engine .. get a little over powered say another 10 hp also makes a huge difference to hull performance in seas, and cruise speed.. and if travel at the same or just above the old cruise speed, pick up a good 10% better economy.

Comparing boats can only be done by correctly propping the boat for its end purpose (be it general use, skiing, towing, racing etc)  Then re power with different engine and then repropping correctly for the same purpose.. 
 It is no good comparing power/ boats between hulls , espec when drop the deeper surtees into the mix.

Also its a good idea when sea trialling, load the boat up as if it was fully loaded ....and note also the chances are it will be propped for the light load performance (as in most  marketing reviews) .. so the extra load will also make a difference espec if min powered..

Bottom line thu...
Sort out"
1/ what you intend to use it for most of the time
2/ what your expectations are for cruise speed flat ish water fully loaded at a given rpms.
 3/ calc the required hp to move that  total weight at that speed rpms, then add another 10 to 15% for reserve power
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote offcut1 Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 9:54am
offcut1 View Drop Down
Bronze
Bronze


Joined: 21 Dec 2011
Status: Offline
Points: 82
Hi Steps,

If we looked at a 575 Workmate Hardtop,

Hull = 625
Outboard = 170
Fuel = 100
Crew = 400
Equipment = 100
Ballast = 200
Max total weight  = 1595kg

Is a 115HP enough? 
Thats the max recommended HP for this hull. I do most of my cruising at around the 22knot mark. I can't see any reason I'd need to do more than 30knots. Im more interested in maintaining speed in rough conditions. Ie, fully loaded on a rough day I'd want to be able to get up on the plane quickly and hold somewhere around 16-18knots.
Back to Top
Post Options Post Options   Likes (1) Likes(1)   Quote Bounty Hunter Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 12:26pm
Bounty Hunter View Drop Down
Titanium
Titanium
Avatar

Joined: 14 Nov 2002
Location: Russell
Status: Offline
Points: 4393
Originally posted by offcut1 offcut1 wrote:

Hi Steps,

If we looked at a 575 Workmate Hardtop,

Hull = 625
Outboard = 170
Fuel = 100
Crew = 400
Equipment = 100
Ballast = 200
Max total weight  = 1595kg

Is a 115HP enough? 
Thats the max recommended HP for this hull. I do most of my cruising at around the 22knot mark. I can't see any reason I'd need to do more than 30knots. Im more interested in maintaining speed in rough conditions. Ie, fully loaded on a rough day I'd want to be able to get up on the plane quickly and hold somewhere around 16-18knots.

this discussion has been worked over multiple times in the past. the general consensus that results is that 90/100hp is okay but doesnt offer sparkling performance. 

the surtees hulls dont offer a lot of lift with their 'minimal' chine flats and as a result tend to be a bit hp hungry.

if you want more 'go' - opt for the max hull rating - which is 115hp - and was referencing the old yamaha 115hp 4stroke. yamaha now have the new 130hp which is the same motor as the 90 and 115 - and i would expect that surtees would have no issue with this newer, higher output engine going on the transom.

you also mentioned that slow planing speed was desirable - installing trim tabs will help a lot with this, and will help you offset the surtees trait of lying on the windward chine when travelling across the weather.  
No disintegrations!
Back to Top
Post Options Post Options   Likes (2) Likes(2)   Quote Bounty Hunter Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 12:29pm
Bounty Hunter View Drop Down
Titanium
Titanium
Avatar

Joined: 14 Nov 2002
Location: Russell
Status: Offline
Points: 4393
and going back to the 'stability of the pontoon' hulls - remember that sealed chambers only offer buoyancy - not stability.

stability comes from hull form and vertical center of gravity.
No disintegrations!
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote JustAnotherSpearo Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 7:42pm
JustAnotherSpearo View Drop Down
Platinum
Platinum


Joined: 12 Mar 2016
Location: Northland
Status: Offline
Points: 1235
Originally posted by offcut1 offcut1 wrote:

Hi Steps,
 I do most of my cruising at around the 22knot mark. I can't see any reason I'd need to do more than 30knots. 

Mate.. you say that, but from experience if it costs next to nothing to go a little quicker on nice days you end up doing it.. The next outboard on the 520 lazer at this stage (whenever the lil 90 dies) will be the lightest 115 / whatever the max HP same weight as the 115hp.

The size you are looking at id be wanting to go up a fair amount. Steps does make sense with the economical cruise aspect. 90hp on the 520 when fully loaded with spearos (3 adults) achieves 31mph on the flat days trimmed up at 5000rpm. an extra 120kg from one guy + gear makes a huge difference for us, our WOT goes from 40mph down to 38mph
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Schampy Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 8:19pm
Schampy View Drop Down
Platinum
Platinum


Joined: 14 Aug 2014
Status: Offline
Points: 1980
Like I said,if I were to get another 575 I would opt for the 130 Yam.
Its a longer, heavier boat than the 5.5 ( 5mm hull = 90 kg extra weight) The throttle works in both directions. 
Like Bounty said.... stacks has been written about Surtees love of HP on the stern. Nothing changes in 2018...Dont over-think it. Just go for max you can afford and be happy with it.
cheers
Lance.

Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote 3rnzir Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2018 at 10:27pm
3rnzir View Drop Down
Platinum
Platinum


Joined: 15 Oct 2004
Status: Offline
Points: 1234
Do you really need a hard top?
Reason I ask is
Can you get a high glass option in the seated position?
And use clears instead.
Hardtops do provide excellent cover,but do tend to act like a sail at sea.
Clears on the other hand,when removed,negate this sail effect to a significate degreee.
Though clears should really be called opaques.
Hence quality glass to be installed at seated height.
The fold down option for garaging is also an prospect with clears if space/is an issue .
Hard tops gernerally add 15% to the new purchase price.
Welding finishing/painting etc.
 

Peace.Via superior firepower..
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Time_Bandit Quote  Post ReplyReply Direct Link To This Post Posted: 10 Jan 2018 at 8:26am
Time_Bandit View Drop Down
Platinum
Platinum
Avatar

Joined: 19 Mar 2012
Status: Offline
Points: 2122
Where are you getting your info that a yammy 90 115 130 are the same ???
“Be yourself; everyone else is already taken.”

Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Grasshoppa Quote  Post ReplyReply Direct Link To This Post Posted: 10 Jan 2018 at 8:57am
Grasshoppa View Drop Down
Gold
Gold
Avatar

Joined: 17 Sep 2007
Location: Wellington
Status: Offline
Points: 560
Originally posted by Time_Bandit Time_Bandit wrote:

Where are you getting your info that a yammy 90 115 130 are the same ???

Pretty widely known fact that all these models share the same 1832cc power plant, checking any online brochure/website will confirm
Theres also less than 10kg weight difference across the range
Would suggest the stated horsepower differences are due to different states of engine tune via ECU
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Steps Quote  Post ReplyReply Direct Link To This Post Posted: 10 Jan 2018 at 9:41am
Steps View Drop Down
Titanium
Titanium


Joined: 14 Oct 2013
Location: Franklin
Status: Offline
Points: 12854
Hi Steps,
If we looked at a 575 Workmate Hardtop,
Hull = 625
Outboard = 170
Fuel = 100
Crew = 400
Equipment = 100
Ballast = 200
Max total weight  = 1595kg

Is a 115HP enough? 
Thats the max recommended HP for this hull. I do most of my cruising at around the 22knot mark. I can't see any reason I'd need to do more than 30knots. Im more interested in maintaining speed in rough conditions

1st...  having the power to maintain plain in seas has a unintended side effect... you get a faster cruise speed... and faster WoT.

 1595 (1600kg) sounds on the rather heavy side to me
But lets go with that.
 most boat around the size discussed in chop need to maintain around the 20/ 23 mph (19knt) not to fall off the plain
 To travel at 19knt flat water requires around 55/60 hp generally around the 3300 rpms... then add another 10 to 15% reserve power on so you dont stall / slow on the wave in front..
thats 60/ 65 hp required.
Note here you are looking at around 22 knt cruise flat water... that not far off min plain.. that requires 60 hp...at around a cruise rpms of 3800/4000 rpms.
 Drop a little speed and rpms in chop and you will be dropping on and off the plain.. having to put throttle in to get back up, go too fast , hit that next big wave  and big bang..
 See where this is going?

So lets go back to this
"
General rule of thumb for a 5/ 5.5 6m boat a top speed at best trim flat water  around low to mid 40 mph fully loaded will achieve this.
 Bare bones, 4 or 5 mph faster.
This will give a reasonable cruise speed on good flat ish water around the 30/32 mph in the 3800/ 4000 rpms range"

You have 1600kg which I think is on the high side ( quite a bit for a boat around 5.5m)
 A fully loaded old commander .. spare prop, spar anchor, 3 guys ave 90 kg, fishing gear, full 110L tank, bimmini / clears, fishing gear etc is around the 1200/1250 kg)
115 hp at the prop was min hp.. hit a good chop and staying on the plain was a b1tch.. the big crashed down even more.

 To get say 43mph (37knt) WoT you will need around 155 hp
If 115 hp is top spec to achieve the 37 knt the boat fully loaded will weigh about 1150/ 1200 kg... which I think would be far more in the correct range.. thu slightly on the light side.

Anything over 1200/1250 I would putting 115 hp as min and 140 max for best performance.
 Now keep in mind the New 4S have a good 10 to 15% more hp than advertised...
 So a modern 115hp 4S will have around  130 hp at the prop...

Also going on the few hp/rpm charts I do have.. will produce a little more than the required hp0 to maintain comfortable speed in chop without dropping off the plain

Basically the number back up what BH  TB scampy all comment on the above.
 And take note of the extra "200kg" ballast of the surtess.. and the extra hp to move the "1600kg" in chop and the repeated comments in other posts

Yesterday the Tamaki channel chopped up a little from the west.. so heading back up from  Ponui was going to be a bit bumpy.. there was another boat about 1/4 of the way heading back, around a 5.5m alloy.. could not make out whatsort..
It was still well back from the ramp, having a crap job  falling off the plain as we where pulling into the pontoon..
 We 'cruied at 23 mph in the more heavy stuff, increased to 38mph as got into a little lea of land, and not a single thump.. The only thing that shork loose was the windscreen squeegee fall off the dash where there is no bar to hold stuff up at the end.
I must add thu we are around 10 hp over powered (150hp)
 That is the difference of well powered and min powered.

PS falling off the plain chews a heap more gas... maintaining plain in chop, you use far less gas than even normal economic cruise...

If you take a min  powered hull, (power requirement not boat specs) load a heap of ballast into the bottom, it will cut thru the waves better.. like the old heavy glass boats did..but you are damn near running a plaining hull as a displacement hull







Back to Top
Page  12>
Forum Jump
Forum Permissions View Drop Down


This page was generated in 0.250 seconds.

Fishing Reports Visit Reports

Saltwater Fishing Reports
Raglan Fishing Report - 12/11/26

Big spring snapper. With the more settled weather over the last couple of weeks there’s... Read More >

12 Nov 2026
Saltwater Fishing Reports
Mercury Bay Fishing Report - 12/11/26

Snapper hit and miss. Most reports have been telling us it’s becoming more difficult to... Read More >

12 Nov 2026
Saltwater Fishing Reports
Northland Fishing Report - 12/11/26

The switch has been flicked on! Call it what you want, El Niño, global warming,... Read More >

12 Nov 2026
Saltwater Fishing Reports
Tauranga Fishing Report - 12/11/26

Snapper and kahawai in close. Again, we start on a positive note, with some nice... Read More >

12 Nov 2026
Fishing bite times Fishing bite times

Major Bites

Minor Bites

Major Bites

Minor Bites