I have been having some undesirable spray from my transducer so decided to make a spray guard.
I ended up making 3.

Mark 1



Mark 2



Mark 3



I'm not sure why the second 2 pics rotated sorry.
1st one would probably work best but it stops the transducer popping up if it gets pushed off the trailer to shallow.
The 2nd one was a little to centered and short and I didn't think it would stop the spray.
The 3rd is similar to 2nd but it mounts further to the left and is 2 inches longer than the 2nd. Hopefully it does the job!

Made from 2mm Alloy.

Interesting, let us know the results.

Yeah the mist is an issue but I dont think Im getting too much of that. The reason I made one was the water coming off the transducer was blasting up at the lower cowling and some was getting in. I rinse under the cowling and inox but nice to try and keep it dry as well. Im looking forward to testing it. Just need to find the time.