I have removed my old transducer from my boat and will be installing a new one soon. The hole to poke the cable through is below the water line (Boat is glass) and was filled with some kind of silocon. Is this the best option to fill a 1" hole with a transducer cable in it. Obviously the hole is that big to get the plug through. Personally i would have put the cable through above the water line but its been done by the previous owner.
Or, would i be better to get that hole repaired and poke the cable through above the water line? If so how to repair a hole like that?
), they are not cheap but I have used them to do exactly what you describe and as a extra precaution back filled them on the inside with sika flex if they are below the waterline. Sikaflex on its own will work but these are better and look far less agricultural
Colder water, hotter fishing As the water temperature has dropped, the pre-dawn air temperature has... Read More >
Snapper everywhere along the coast Harbour snapper are still biting and they are in prime... Read More >
Baits out-fishing lures The high cost of fuel may be deterring a lot of anglers... Read More >
Smorgasbord of fishing options Over the last month, the weather has taken a turn towards... Read More >
Major Bites
Minor Bites
Major Bites
Minor Bites
Forum Topics
New Posts
Search
FAQ
Register
Login
Topic Options
Post Options
Likes(0)
