
When fisherman talk about balanced gear it means making sure the reel, rod, line, sinker and terminal tackle are suited to each other. Some rods aren't designed to cast a heavy sinker others are. I don't have the knowledge to recommend anything in particular. Make sure you use a mono shock leader when casting with braid... as has already been said, good gear and good technique are both necessary to get distance.
Narcosis, what Smudge said is right- try and fish sinker weights that are within the rod rating (this is usually printed on the bottom section of the rod). I'm not a guru but one of the basic things taught to me is to swing the rod back to "load" it and power forward just as the rod wants to spring back. Too light a sinker will not load your rod properly while a sinker that is too heavy will cause the rod to lose power on the forward cast.
Make sure you have a shock leader to go with that 10lb braid (40lb mono should suffice for 4oz sinker). It will be more comfortable to cast with as it will allow your to put some power into the cast without braid cutting into your finger.
Good fish the reward for patient anglers Winter has settled across the Coromandel, bringing with... Read More >
Gurnard arrive in numbers While the snapper bite may have slowed down, another culinary delight... Read More >
Tuna and Tarakihi Talk Winter has once again delivered what many gamefishers have come to... Read More >
Larger lures & inchikus effective against undersized snaps A few beautifully calm days over the... Read More >