Forum Topics
New Posts
Search
FAQ
Register
Login
snake guide replacement
Topic Options
Post Options
Likes(0)
Have posted this in freshwater section to.
I have been asked to replace a broken snake guide on a Sage 6 weight fly rod for someone. Only ever done a couple of these over the years but nothing as delicate, can anyone tell me what size thread one should use as I don't want to upset the balance or action of the rod, guide is 2nd on down from tip.
I was thinking of using some 1kg mono or as below in photo also thinking flexicoat maybe bit heavy so would fly tying cement be more suitable to coating binding.
I have been asked to replace a broken snake guide on a Sage 6 weight fly rod for someone. Only ever done a couple of these over the years but nothing as delicate, can anyone tell me what size thread one should use as I don't want to upset the balance or action of the rod, guide is 2nd on down from tip.
I was thinking of using some 1kg mono or as below in photo also thinking flexicoat maybe bit heavy so would fly tying cement be more suitable to coating binding.
www.tzercharters.co.nz
https://www.facebook.com/pages/Tzer-Charters/254559404707318
https://www.facebook.com/pages/Tzer-Charters/254559404707318
A lot of fly rods are built with silk thread. These are identified as the tread goes very opaque when the finish is applied. You could use Midera 40 if you are wanting a mid opaque look or an A rod building tread if needing a solid look. Just apply 2 thin coats of finish. i would not use high build epoxy on fly rods. I use D2 as it is thinner and dries flatter.
Rod building nylon goes opaque, just like the thread on the sages, I put a keeper hook on one a few weeks ago and got an almost perfect match from size a nylon, just don't use colourfast
I have built a few fly rods - "A" thread works great, if you use non-colourfast the thread goes transparent but still has a hue/tint from original colour.
definitely don't use high build epoxy or if that's all you have, thin it with acetone or meths) or heat it till its super runny and apply sparingly
Did you get this done?
I can do it for you if you want.
I can do it for you if you want.
 Xtoad wrote:Did you get this done? I can do it for you if you want. |
All done thanks.
Bloody fiddly things snake guides are, just as well I only get to replace them once in a blue moon.
www.tzercharters.co.nz
https://www.facebook.com/pages/Tzer-Charters/254559404707318
https://www.facebook.com/pages/Tzer-Charters/254559404707318
Forum Jump
Forum Permissions 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
This page was generated in 0.107 seconds.