Friend has a 4 draw filing cabinet....racks and a ply door... lifted up with a small lpg burner underneath, cake tin for the wood chips, and a water tray (old oven tray) above that.
The burner is small enough to also cold smoke.. he does hams , bacon alsorts of stuff.
For vent, the door leaks just enough, works so left it like that.
Yrs ago my old man had similar stand up drying cabinet converted into a smoker
I was going to build the same as the filing cabinet.. but a special came up on a 4 rack cabinet gas smoker... added up the costs and worked out by the time I had set everything up.. burners trays, the retail special was only going to be a few bucks more.
Found several things a problem.
The door seals sucked, the exit vent too small to allow cold smoking, the burner was larger than should have been, and the lpg regulator was higher rated than needed.. way higher
How I moded including extra shelves in older threads.
Only suggestion I do make... set it up so can cold smoke also... later when get into it, espec on larger cuts and quantities, the end results of a cold smoke and a little tweaking of marinates , over hot smoking are dramatic
Check out some of the older posts that some of the other guys are doing with stuff...amazing is an understatement... some of their home made smokers.
Using the smoker for a food warmer.. eg roast veggies at a large family or club function imparts a very nice , very subtle clean background flavour