Print Page | Close Window

Sticky Swing Hatch

Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Yak Yak Yak
Forum Description: The forum for Kayak enthusiasts
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=7053
Printed Date: 16 Jun 2026 at 10:57pm


Topic: Sticky Swing Hatch
Posted By: Slab
Subject: Sticky Swing Hatch
Date Posted: 01 Dec 2004 at 10:14am

 

Any of you Swing owners got a tip on stopping the small day hatch in front of the seat sticking?

It works fine untill I sit my ample posterior in the yak at which stage it is a bit of a nightmare to remove. It feels like the plastic cockpit area streches a bit when sitting on the seat  making it hard to unscrew. I can remove it by lifting my weight off the seat, not ideal in sloppy conditions.

 

Any ideas.




Replies:
Posted By: dreadeye
Date Posted: 01 Dec 2004 at 11:04am
Maybe some foam bracing in between the seat and the bottom of the yak could reduce the flex?


Posted By: Matt B
Date Posted: 01 Dec 2004 at 12:29pm
reduce the size of your ample posterior?

-------------
Put your vote where your mouth is.


Posted By: DogFish
Date Posted: 01 Dec 2004 at 12:48pm

A reasonably thick stainless steel backing ring fitted to the inside of the hatch cut-out may help stop any flexing?

Otherwise dreadeye's suggestion may be worth trying out.

DogFish

 



Posted By: Slab
Date Posted: 01 Dec 2004 at 1:29pm
Cheers Fellas, all good sugestions except Matt B's.


Posted By: billybob
Date Posted: 01 Dec 2004 at 8:40pm
Just put a little bit of Armor-All around the thread of the hatch lid and spin it in and out a couple of times. It'll be smooth 'as' after that.
Try not to get any on the little rubber 'O' ring.


Posted By: empty
Date Posted: 01 Dec 2004 at 9:28pm
you can always get out and unscrew it

-------------
what happened to the pissing man?



Print Page | Close Window