FAQ FAQ  Forum Search   Events   Register Register  Login Login

SNapped Surfcaster

Post Options Post Options   Likes (0) Likes(0)   Quote jaypeegee Quote  Post ReplyReply Direct Link To This Post Topic: SNapped Surfcaster
    Posted: 24 Nov 2014 at 10:49am
jaypeegee View Drop Down

Joined: 22 Aug 2010
Location: Neo Tea Roa
Status: Offline
Points: 1503

SK4. Snapped bout 50cms from tip - Since replaced.

Reading here
I figured I would sacrifice an old BBE 10-15 KG rod and attempt a fix on the broken tip section

Currently working off scenario two for method as seems closest to what I need

"2. A 6-weight fly rod, broken about a foot from the tip, between the second and third guide."

Two questions:

How translatable are the instructions given they were written for a Fly rod and not a surfcaster

Will the use of carbon fibre cloth and epoxy be a comparable sleeve solution compared to a sleeve made from a wider section od the BBE? That is, use a short piece inside the sonik to join as scenario two suggests but then use the CF tape and epoxy externally.

If it doesn't work I have lost little except for time and the BBE has given it's guides up gracefully for a future rewrap I have in mind to convert a jelly tip from spin to O/head

Any thoughts/insight/advice is/are welcomed.

"You don't have to be smart to laugh at a fart, but you have to be stupid not to."
Back to Top
Forum Jump
Forum Permissions View Drop Down

This page was generated in 0.199 seconds.