Semi rigged - Usually another rod behind the seat and handheld gps on a marine mount in the console area

 

 

Gaf kept un leashed at side of rear bins.

 

 

Bin at the back for anchor stowage and fish (with stringer), front 6pack chilly bin for easy access to dry supplies and food. Rods at the back kept on short lanyards to minimise ropes on the deck

 

 

Front Scotty (rodmasterII) rod holder and paddle leash

 

 

Anchor trolley on the port side with sea anchor, rudder trolley on the starboard side.

 

I have been trying to keep it simple and this set up is working well at the mo. The front rod has a 1.5m leash that is connected at the same point as the paddle leash. GPS mount is not fully complete but will also include a chopping board and room for sounder. Cut baits are usually kept in the front drink holder or centre hatch.

 

Waka

 

 

 

Waka

Plier holder is made from a bit of a narrow vaccum cleaner nozle and S/S pliers are secured with a bungie cord loop.    I use them all the time to re;move hooks cut traces etc and want them handy but secure.

 

This is the mark II model wheel.    Mark I was welded on too far forward   and thus could not house a big enough wheel.   It also stuck out and tangled my berley line.    The reason for the wheel is that the narrow skeg gets ground through when pulling up a concrete ramp, etc, which creates a leak over time.     The wall is only about 4mm thick and since the material is so soft it does not take long before enough has been removed to  create a hole.

 

The new model works a treat and not only prevents the above but also makes pulling up a lot easier.     Whats more the design no longer tangles any line that sweeps back.    The housing is made from a F&D centre hatch cutout and the wheel is cut from an old cutting board.    I have got three wheels from the board which I can replace should one wear out.

 

This is my transducer mount.    Two small lugs weded onto the bottom of the hull in a slight wedge shape.    Tab of silicone and the transducer is forced into the wedge and secured with three cable ties over a piece of rubber hose.    Will never come off and beats the crap out of all the foam surrounds and adhesives which a lot of people have problems with.

 

Rainbow

 

Rainbow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oh, and those gumboots are for throwing at great whites. Can also be used for bailing water, storing bait and a drinking receptacle And you thought they were just for show

 

Rainbow, has your Misses realised that she's missing a part of her vacuum cleaner yet

 

Over the winter I have been rigging up the fishing machine. Have added GPS fish finder, VHF, anchor running rig etc. Can't wait to test it all out this season.
http://i62.photobucket.com/albums/h81/mdusmurf/Rigged%20Kayak/DSC02880small.jpg