Print Page | Close Window

Elite 7 hdi

Printed From: The Fishing Website
Category: General Forums
Forum Name: Tech Topics
Forum Description: IT - Computers, software, phones, ISP's....
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=95467
Printed Date: 22 Nov 2026 at 7:24am


Topic: Elite 7 hdi
Posted By: billyhill
Subject: Elite 7 hdi
Date Posted: 28 Oct 2013 at 8:27pm
I have a Lowrance elite 7 hdi in my boat.Just updated software to version 1.8 from their website.I was looking forward to the promised 1 foot contour mapping but now that its loaded its worse detail wise than it was with the original software!!Running Navionics platinum card so I know the detail is in there somewhere,anybody got any ideas please?



Replies:
Posted By: flyfisher
Date Posted: 28 Oct 2013 at 9:14pm
You may need to re-select you chart card from the menu, it's probably defaulted back to the inbuilt maps. And once selected choose all the high detail options.


-------------
https://www.youtube.com/user/troutboynz


Posted By: billyhill
Date Posted: 29 Oct 2013 at 3:00pm
Tried that allready no change.Its def running on Navionics as when I change th Lowrance mapping its far less detailed.There are no  high details settings to change to??


Posted By: Jet_ski_fisher
Date Posted: 29 Oct 2013 at 4:19pm
try this. pull the card out when it's off, switch it on, when fully booted,insert the card then try again. but try below first..hope it helps

1. To ensure that the Navionics details in the HDS UNIT are turned on: 
 a. Press MENU button once. 
 b. Select CHART OPTIONS and press ENTER. 
 c. Highlight SETTINGS and press ENTER. 
 d. Highlight the desired option and press ENTER 
 i. SAFETY DEPTH SHADING – allows the shading display of depth areas corresponding to the safety contour 
 desired. Available options: 
 a. OFF – no depth shading displayed 
 b. OTHER NUMERIC DEPTH VALUES – the areas with depths up to value selected are displayed in shades 
 going from darker blue (for lower depths) to lighter blue (for higher depths). The areas whose depths are over the 
 selected value, and therefore navigable under safety conditions, will be displayed in white. The DRYLINE areas are 
 displayed in green. 



-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<


Posted By: billyhill
Date Posted: 29 Oct 2013 at 8:02pm
Thanks for that David but neither worked.unit is hdi not hds so has no chart option on menu.


Posted By: Jet_ski_fisher
Date Posted: 29 Oct 2013 at 8:23pm
ahh ok my bad sorry about that. 
page 42 has the layout for what menu is there to look at and change.
http://www.lowrance.com/Root/Lowrance-Documents/US/ELITE-7_HDI_OM_EN_988-10423-001_w.pdf" rel="nofollow - http://www.lowrance.com/Root/Lowrance-Documents/US/ELITE-7_HDI_OM_EN_988-10423-001_w.pdf
Is the card and or unit under warranty? have you tried cleaning the contacts on the card, do you have a gold card you can use to check to see if it is the card playing up?


-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<



Print Page | Close Window