Yamaha FXHO....
Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Hints,Tips and How To's
Forum Description: Rigs, tackle, baits, angling techniques, tips and hints & your DIY projects here
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=90873
Printed Date: 11 Jun 2026 at 10:17pm
Topic: Yamaha FXHO....
Posted By: Jet_ski_fisher
Subject: Yamaha FXHO....
Date Posted: 13 May 2013 at 5:01pm
|
I have found a way to mount the hds 5 unit's in the cup holder area. get two alloy strips 30 40 mm wide by 150mm long and bend like |__ <== this...x 2 and mount the bent alloy pieces | in the side skirting area bolt on each side to hold them in place. the hds 5 will now sit quite happy in the cup holder minus the top cover that has to be taken off.. or it won't fit..drill two holes where the cup holder catch sit's but down on the flat part, and route the power ducer cable. i used some spare 2mtrs twin core tinned cable to the battery and bolted to the battery as they had bolts on them, so used them instead..then mount the ducer at the far right corner with sikaflex 291i to the hull.. and you're good to go...
------------- http://www.legasea.co.nz" rel="nofollow">  MH... Catch measure release...<*))))< |