Plastimo Stove burners
Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=89257
Printed Date: 06 Jun 2026 at 3:49pm
Topic: Plastimo Stove burners
Posted By: Don18025
Subject: Plastimo Stove burners
Date Posted: 19 Mar 2013 at 12:00pm
|
I have had a two burner and grill Plastimo Neptune 2500 stove on my launch for the past 8 years. The burners have begun to crap out, so about time for an overhaul. I purchased the stove new of RFD (now Survivetech) the NZ agents for Plastimo. You guessed, it they have no spare parts for the stoves etc. and not interested in my enquiry. Anyone know anyone who may have some Plastimo stove burners available. I am looking for new burner caps (single screw) and will also purchase rings if available. There maybe a gas fitter who does boats and RVs who may have some in parts box. Phone numbers etc. Need a working stove for Easter, just to make a cup of tea. |
Replies:
Posted By: Norseman
Date Posted: 19 Mar 2013 at 5:26pm
|
Might check if any of the other burner caps off a different Plastimo Neptune model will fit. http://www.mailspeedmarine.com/plastimo/cookers-galley-equipment.bhtml" rel="nofollow - http://www.mailspeedmarine.com/plastimo/cookers-galley-equipment.bhtml http://www.marvel.net.nz/details.php?product_id=255" rel="nofollow - http://www.marvel.net.nz/details.php?product_id=255
------------- "Nothing is so strong as gentleness, nothing so gentle as real strength." St. Francis de Sales |
Posted By: Don18025
Date Posted: 19 Mar 2013 at 6:05pm
|
Many thanks Norseman, I had not thought of Marvel. I will check them out in the morning. Thank you for the advice |
Posted By: pjc
Date Posted: 26 Aug 2017 at 3:21pm
|
Old post but I need a new gas line for the oven plastimo stove,burners on top are fine just the gas line to oven needs replacing,who could make one for me?? ------------- Sex at 58.Lucky I live at 56 |
Posted By: pjc
Date Posted: 26 Aug 2017 at 5:38pm
|
ok have removed old alloy pipe,just 6mm o/d 2 barrels things and nipple things,would any gas/plumbing shop have what i want? ------------- Sex at 58.Lucky I live at 56 |
Posted By: Don18025
Date Posted: 27 Aug 2017 at 8:11am
|
Hi PJC Take it to your nearest friendly gas fitter. He should be able to make one for you. Some gas fitters will require the stove to test it before letting you reinstall. I found getting Plastimo parts impossible here in NZ... so purchased a new stove. Our marine industry should provide better service
|
Posted By: pjc
Date Posted: 27 Aug 2017 at 9:16am
|
Thanks Don,have stove at home and yes was going to test first,excellent stove/oven ------------- Sex at 58.Lucky I live at 56 |
Posted By: MikeAqua
Date Posted: 29 Aug 2017 at 10:20am
Just an observation that under the consumer guarantees act suppliers have a legal obligation to have reasonable availability of parts. If they don't you can stick it to them in disputes tribunal. |
Don18025 wrote:Posted By: pjc
Date Posted: 29 Aug 2017 at 6:01pm
------------- Sex at 58.Lucky I live at 56 |
Posted By: Steps
Date Posted: 30 Aug 2017 at 9:06am
|
Replacing, repair gas lines will need certification.. similar to fitting/ repairing a tank lines in a caravan boat, car or house . in saying that making up gas lines is not hard if have a flare roller. All lines joins need to be pressure tested with soapy water. Replace the jet with a blank But if not cerfied, the insurance issues, and beyond that if ppl get hurt. |
Posted By: gchead
Date Posted: 04 Oct 2023 at 9:07am
|
Try this website. Seems they have all the Plasimo burner spares and shop to NZ . https://www.sparesmarine.co.uk/webshop/cookers/neptune-2500-hob/plastimo-neptune-2500-hob-all-spares/ |