Print Page | Close Window

Uploading waypoints to gp7000f

Printed From: The Fishing Website
Category: General Forums
Forum Name: Tech Topics
Forum Description: IT - Computers, software, phones, ISP's....
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=81822
Printed Date: 22 Nov 2026 at 7:34am


Topic: Uploading waypoints to gp7000f
Posted By: Seabass
Subject: Uploading waypoints to gp7000f
Date Posted: 26 Aug 2012 at 8:19pm
Hi guys.
I Assume this has been discussed before but my searches don't show much.
Can any one please advice how I can upload or transfer waypoints from my pc / lap top to my gp7000f? ENL say it's not possible???? I have SD card readers and happy to get a nmea cable.
Having to manually input a couple hundred spots in the unit doesn't interest me that much.
Cheers.

-------------
SWG for life.....



Replies:
Posted By: Bay Marine Electronics
Date Posted: 26 Aug 2012 at 8:41pm
What format are the waypoints in now? GPX or similar? If so send them through to me in an email and I'll flick em back in correct format with instructions


-------------
0800 BAY MARINE www.baymarineelectronics.co.nz


Posted By: Seabass
Date Posted: 26 Aug 2012 at 9:17pm
Hi BME, great. They are in an excel file at moment. Is that workable for you?

-------------
SWG for life.....


Posted By: Jet_ski_fisher
Date Posted: 26 Aug 2012 at 11:13pm
http://www.expertgps.com/gpx-converter.asp" rel="nofollow - http://www.expertgps.com/gpx-converter.asp
this is one way to import many excel data to gpx, just import excel data to expert gps and save to blank sd card load them up in the 7000F all done...


-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<


Posted By: Bay Marine Electronics
Date Posted: 27 Aug 2012 at 8:13am
Excel is fine, send em to
[email protected]



-------------
0800 BAY MARINE www.baymarineelectronics.co.nz


Posted By: Seabass
Date Posted: 27 Aug 2012 at 5:31pm
Thanks BME. I'll get them cleaned and flick them through in the next day or so. Most appreciated.

-------------
SWG for life.....


Posted By: Seabass
Date Posted: 14 Sep 2012 at 8:39pm
Hi again,
Having no luck still sorry. Got gpx files sorted but cannot load them onto my machine. When I save a waypoint to a clean SD card to check the directory it appears to save as a .bin file? Not sure what I'm doing wrong.
Cheers.

-------------
SWG for life.....


Posted By: Seabass
Date Posted: 14 Sep 2012 at 8:41pm
Sorry I meant . MRK files sorted

-------------
SWG for life.....


Posted By: Bay Marine Electronics
Date Posted: 17 Sep 2012 at 8:30am
Sorry I did get your email, I have been in Pauanui and Auckland installing gear - I'll try to sort them out tonight, save them as BIN instead

Cheers

Rob


-------------
0800 BAY MARINE www.baymarineelectronics.co.nz


Posted By: Jet_ski_fisher
Date Posted: 17 Sep 2012 at 4:14pm
Hi bay marine, what program can i use to read navonics mrc files or is it bnd files. i am sure the lic is licence file.. 


Posted By: Seabass
Date Posted: 17 Sep 2012 at 5:34pm
Thanks a heap BME. Look forward to trying them out. Most appreciated.
Cheers.

-------------
SWG for life.....


Posted By: Bay Marine Electronics
Date Posted: 18 Sep 2012 at 11:34am
I assume by display the MRC files you mean copying the files to a computer from the card and reading the information there. If so, I haven't heard of anything. It would be a massive job staying one step ahead of Navionics encryption.

If you mean read the card from the card reader - I believe both Raymarine and Lowrance make programs which do this, however I should note I have heard negative reports on both. I also see that Navionics has its own PC program but again I'm not familiar with it, and when I looked on the website there was very little information on it in english.

Garmin's Homeport program is very good however only reads Garmin charts.


-------------
0800 BAY MARINE www.baymarineelectronics.co.nz


Posted By: Jet_ski_fisher
Date Posted: 18 Sep 2012 at 12:18pm
Thanks bay marine, yes navonics is pretty hard to decrypt, unlike garmin i have base camp home port bluechart can read all charts from bluechart to G2.  The navionics charts are encrypted using the serial number on the card. This is to prevent you from copying the charts from one card to another.oh well  god loves a trier lol 


Posted By: Seabass
Date Posted: 11 Oct 2012 at 9:00pm
Thanks BME, finally got around to load the bin file and she's a glam. Most appreciated.

-------------
SWG for life.....



Print Page | Close Window