Print Page | Close Window

etrex gps help !

Printed From: The Fishing Website
Category: General Forums
Forum Name: Tech Topics
Forum Description: IT - Computers, software, phones, ISP's....
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=76780
Printed Date: 22 Nov 2026 at 7:47am


Topic: etrex gps help !
Posted By: paddyak
Subject: etrex gps help !
Date Posted: 14 Mar 2012 at 2:28pm
Hi  ...GPS experts please go easy on me Unhappy 

i have an early etrex handheld gps  ..the basic yellow model .. works fine for marking a spot and getting back to it which was it's sole purpose anyway . but now i want to start entering in coordinates from say Google maps or geogarge and it all goes pear shaped as it's north and east not south and east ?? if that makes sense...i have scoured through other forums etc and found some info on negatives and datums and other mumbo jumbo i have no idea about and i'm even more confused than before ...is there a way of correcting this to enter them in as i see them or do i have to go through some sort of wizardry and calculate stuff ...
the other question is .is there a reasonably priced handheld out there that i could use a software based chart and like click and drag or something ...sorry i'm complete noob when it comes to gps !!



Replies:
Posted By: Jet_ski_fisher
Date Posted: 14 Mar 2012 at 3:46pm
http://forums.gps.org.nz/ - http://forums.gps.org.nz/
They can help you big time. what did you set the datum up as? WGS84 is best
lat/lon hddd'mm .mmm' 
so that gives you S41 24.950 E174 48.400 etc
Google maps will give you -41.607228,174.726563  then you have to convert it. we are as in nz are between 160 and 180 by 30 by 50  and between is 1 degree  

click n drag? always go ipad with street maps you can always go and buy a 60csx for charts marine and topo charts or get one with touch screen to tap n drag the screen charts..do you need it for tramping fishing or hunting?


-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<


Posted By: paddyak
Date Posted: 14 Mar 2012 at 4:08pm
Cheers HGC 
a guy at work seen me fiddling around with it . it turns out he's a gps nut and has sorted it out ...it's reading correct long & lats now ...yeh it wasn't set to wgs84 . he also chenged the position format to hddd mm mmm and the units etc ....actually everything was f*kked up on it . 
I bought it 2nd hand like that and just used it for marking without ever really  looking at the coords.... which would have been really crap had i needed to call the coast guard and sent them half way to oz Ermm
the main reason i bought it was to mark some fishing spots and structure for diving when i was kayak fishing. but as things are getting a bit more serious now i have a boat and am venturing a bit further out , i guess i should be using it correctly as it can  actually save my skin should the horrible occur! 
i will upgrade eventually to sexier model 


Posted By: Boz19
Date Posted: 14 Mar 2012 at 4:32pm
Hi mate, do you remember where he went to change the settings? Got a similar model and having the same issues as you, I just gave up in the past but would be good to be able to plug in co-ords.


Posted By: Jet_ski_fisher
Date Posted: 14 Mar 2012 at 4:35pm
The 60csx is awesome i know some one that can give you bluechart maps if your interested in charts for almost any garmin micro sd card units.

-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<


Posted By: paddyak
Date Posted: 14 Mar 2012 at 7:38pm
Originally posted by Boz19 Boz19 wrote:

Hi mate, do you remember where he went to change the settings? Got a similar model and having the same issues as you, I just gave up in the past but would be good to be able to plug in co-ords.
 
i'll post exactly what he did tomorrow mate...coz i haven't an effin clue !!WinkLOL


will keep my eye out for a second hand unit on tm ...would like to have the charts on hand alright .would make life easier



Posted By: Jet_ski_fisher
Date Posted: 14 Mar 2012 at 8:35pm
No worry's give me a pm when ya ready..

-------------
http://www.legasea.co.nz" rel="nofollow">
MH... Catch measure release...<*))))<


Posted By: paddyak
Date Posted: 15 Mar 2012 at 11:06am
Originally posted by Boz19 Boz19 wrote:

Hi mate, do you remember where he went to change the settings? Got a similar model and having the same issues as you, I just gave up in the past but would be good to be able to plug in co-ords.

do what this guy says  for number 5... ignore the rest .  http://tramper.co.nz/?4856 - http://tramper.co.nz/?4856
that's what i did before the guy at work helped me out and i didnt reset them so it must be right 

then while in the  settings menu change the following 

position format : hddd°mm.mmm'
map datum " WGS 84
Units:METRIC
and variance should say 022°E (well mine does)

try that and see how you go . remember when entering coords to make sure they're S & E 
lemme know if it's still messed up and i'll ask the expert Wink





Print Page | Close Window