Props to Offshore
Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Popper and Topwater Fishing
Forum Description: If you're into a bit of action on top, this is the forum for you
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=72168
Printed Date: 05 Jun 2026 at 6:37pm
Topic: Props to Offshore
Posted By: fish i
Subject: Props to Offshore
Date Posted: 11 Nov 2011 at 7:43pm
Recently took my 8ft 2 piece Offshore Illusion into Warren Hay. The rod top piece had developed a miniscule 0.5 mm wide tiny little peel , 5mm long strip, on the base of the top piece where it joins into the butt section. To be honest I was not really expecting anything at all, just wanted to see if it was something to be worried about, and if there was anything I could do if it should get worse.
Warrens crew sent it back to Leon at Offshore. Time elapse. Leon sends back a brand new rod complete with new K series Fuji casting guides and a very nice new blingy weave.
So massively big 'ups' to Leon at Offshore. NZ rod builder, building on NZ made CTS blanks, standing by their quality product and producing what I believe is the most reasonably priced top water rod in the market. Cheur to the chur chur!
------------- 6th place in the inaugural Te Kauwhata Regionals paddle crab division
|
Replies:
Posted By: -mAdfis HO-
Date Posted: 12 Nov 2011 at 1:43pm
Choice. Good to know, I have 4 offshore rods and can highly recommend them!
------------- FiShInG rOcKs! ChEeRs -mAdfis HO-
|
Posted By: Kenshin
Date Posted: 12 Nov 2011 at 7:59pm
mean Bro!! sounds looks like an early xmas treat to me.
------------- Be patient and calm – for no one can catch fish in anger. –Herbert Hoover
|
Posted By: wanabe
Date Posted: 12 Nov 2011 at 10:41pm
Go Leon it is nice to know you helped this man out. I own about 12 offshore rods and find them a pleasure to use, on a recent trip to Samoa a 50lb plus gt was caught on my 7/6 popper rod and I must say it handled it well
|
Posted By: The Badger
Date Posted: 13 Nov 2011 at 9:02pm
Posted By: Kumra
Date Posted: 13 Nov 2011 at 9:09pm
|