Print Page | Close Window

Marine Ply. Where to buy

Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=69484
Printed Date: 05 Nov 2026 at 3:24pm


Topic: Marine Ply. Where to buy
Posted By: Millsy
Subject: Marine Ply. Where to buy
Date Posted: 30 Aug 2011 at 9:07am
Where is a place to get hold of quality marine ply near Bombay, South Auckland. BS1088 standard.

Also on the market for Epoxy resin (not polyester) and Dynal cloth in wide rolls.

Ideas?


Replies:
Posted By: Jackson
Date Posted: 30 Aug 2011 at 9:21am
It's not exactly "near" to Bombay, but I just bought a few sheets of BS1088 Meranti from The Plyman in The Concourse, Henderson...

Posted By: Millsy
Date Posted: 30 Aug 2011 at 9:37am
Yeah I heard Plyman is pretty good. Will send them an email for a quote

BOM amounts 5x6mm, 3x12mm, 4x9mm,1x18mm.

Nicholls and Maher in East Tamiki could be worth a shot, bit closer.

Also after fibreglass cloth. 200-300 gram.



Posted By: Blue Asparagus
Date Posted: 30 Aug 2011 at 10:20am
mate pm Too Much on here and ask him the best places to get all that stuff 

-------------
Ultimate GAME Fishing Adventures. Northland

Posted By: Mark Mac
Date Posted: 30 Aug 2011 at 11:03am
Try this site for epoxy. I havent used them, but they were recommended to me
http://www.adhesivetechnologies.co.nz/west.html - http://www.adhesivetechnologies.co.nz/west.html
 
They are in Henderson, so you could pick up ply as well from Plyman


-------------
Time spent on the water doesn't come off your life

Posted By: Don18025
Date Posted: 30 Aug 2011 at 8:06pm
The nearest place to Puke for me was Plytech in Bowden Road, Mt Wellington.
I am not sure of their pricing now but the quality was really good when I built my boats.
http://www.plytech.co.nz/marine_Home.aspx
For epoxy resin the closest manufacturer supplier is the Nuplex shop, on Gt South Road in Penrose. They supply epoxy resin and moulding compounds to many lure makers on this website, but also supply the boat building industry.
If you buying a quantity, and can pay for the lot at once, phone round for quotes and you maybe surprised to have it delivered.

Posted By: Millsy
Date Posted: 19 Sep 2011 at 9:44am
Plytech came thru. Sorted.


Print Page | Close Window