Print Page | Close Window

Casting Jigs

Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Heavy Metal - Jig fishing
Forum Description: Anything related to jig fishing here
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=68387
Printed Date: 21 Nov 2026 at 1:58am


Topic: Casting Jigs
Posted By: fish i
Subject: Casting Jigs
Date Posted: 27 Jul 2011 at 10:41pm
Anyone given this a go in our waters. The yanks look like they do it a lot with tuna workups and other pelagics and reef dwellers in the tropics. Casting smaller broarder shape jigs using 6'+ rods and imparting various jigging techniques. Could see how it would work an area of water on an angle as apposed to vertical jigging or casting surface lures. 

-------------
6th place in the inaugural Te Kauwhata Regionals paddle crab division



Replies:
Posted By: ChrisW
Date Posted: 28 Jul 2011 at 3:43pm
yes this is an area we have overlooked.  I imagine casting with popper/stickbait gear will give your the range using 60-150g jigs.  This should work well with the current deep jig designs we have.
The Asians are casting from land based locations and JM are producing rods for this later this year.  


-------------
give it death!


Posted By: Fish Pimp
Date Posted: 28 Jul 2011 at 4:53pm
Hush !! Chris you wer'nt supposed to tellm about those 80gr snapper jigs until after the Top Catch  compAngry


Posted By: Mr Plastic
Date Posted: 28 Jul 2011 at 5:21pm
We often cast jigs round the150gmmark. Just put a single hook attached to the end. We have had great success trolling jigs at about 5 knts through work ups as well.



Print Page | Close Window