Print Page | Close Window

frewza 405 Cuddy

Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=60976
Printed Date: 21 Jun 2026 at 9:16am


Topic: frewza 405 Cuddy
Posted By: lennyg
Subject: frewza 405 Cuddy
Date Posted: 25 Dec 2010 at 9:23pm

In the process of buying 405 frewza cuddy any thoughts and input on xtras needed for a good setup welcome


Replies:
Posted By: Spearsniper
Date Posted: 25 Dec 2010 at 10:01pm
What are you using your boat for? Diving, spearing, inshore fishing etc...
The more info you can give, the more precise the answers you will get.


-------------
http://spearfishingreview.info" rel="nofollow - www.spearfishingreview.info
"If at first you don't succeed, reload and try again"

Posted By: lennyg
Date Posted: 25 Dec 2010 at 10:15pm
Using boat mainly for softbait and bait fishing around Aucklands waitamata harbour. Will be doing beach launching as well as boatramps. Outboard will be mercury 40hp four stroke

Posted By: Keith C
Date Posted: 25 Dec 2010 at 10:23pm
Hi Len, you could add some of the other specs you are considering e.g. high sides, 4 rod holders, transducer mount, motor long shaft ELPT etc.
 
Also, that it is likely to be used single-handed or two up which may elicit some further valuable inputs.

Posted By: lennyg
Date Posted: 25 Dec 2010 at 10:34pm

Thanx Keith. My specs which i hav put on paper are high sides, sump, bilge pump, boarding ladder specialy for beach launching, nav lights, transducer bracket, removable bait table and 4 rodholders. It comes with cantilever seats.


Print Page | Close Window