Print Page | Close Window

Great post for Newbies

Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Heavy Metal - Jig fishing
Forum Description: Anything related to jig fishing here
Printed Date: 03 Mar 2024 at 10:12pm

Topic: Great post for Newbies
Posted By: kaveman
Subject: Great post for Newbies
Date Posted: 11 Aug 2009 at 11:01am

This would be the most informative and unbiased post i have read.Wink


Posted By: marx
Date Posted: 11 Aug 2009 at 11:17am
One vote for turning this thread into a sticky.

Would cut down on the amount repeated questions and/or give the person asking the questions at least some understanding or reference to what they would like to know.

Science for the mind and Art for the soul.

Posted By: Kezza
Date Posted: 11 Aug 2009 at 11:34am
nice work that man!!

Posted By: Kenzo
Date Posted: 11 Aug 2009 at 11:51am
That is a MUST READ !!!! Absolutely great jigging guide

Posted By: laidbackdood
Date Posted: 11 Aug 2009 at 12:24pm
That is great.One thing i noted was that when making assist rigs,he threaded the cord in through the front of the hook.Isnt it supposed to go through from behind the eye(back)?Maybe,it doesnt matter that much then...........
Bloody good read,i reckon.Good on him.

Posted By: kaveman
Date Posted: 11 Aug 2009 at 1:13pm
Gman also has done one for popping/ stickbaits etc. Just as good IMO


Posted By: Boxee
Date Posted: 11 Aug 2009 at 1:15pm -

Here's the popping one off 360, has a link to jigging as well but probably all the same info.

Posted By: Kezza
Date Posted: 11 Aug 2009 at 1:15pm
what is the link for that kev?....I tried to find it.....the guy is a legend!!!

Posted By: kaveman
Date Posted: 11 Aug 2009 at 1:48pm

just cause you asked for itLOL


Posted By: biggear
Date Posted: 12 Aug 2009 at 7:02am
Well if I can ever find a school of yellowfin in NZ I will be sure to chuck a popper at them.

Dont let the grey hair fool you!

Posted By: Elpescador
Date Posted: 12 Aug 2009 at 9:36am
check out Glen Kross (Gman) is one of the leading exponents of popper / jig fishing his posts are always informative  

Posted By: kaveman
Date Posted: 12 Aug 2009 at 11:27am
Originally posted by Elpescador Elpescador wrote:

check out Glen Kross (Gman) is one of the leading exponents of popper / jig fishing his posts are always informative  

That is  who wrote the posts i put the link up forLOL and is a sticky thread in


Posted By: Sea Draggin
Date Posted: 12 Aug 2009 at 12:24pm
This article written by ChrisW ( I think ) has about as much relavent information.  There are so many good lessons in this.


Speed jigging, deep jigging, Japanese jigging, vertical jigging, extreme jigging, butterfly jigging, working the iron. These are some of the many names given to jigging with long jigs that has swept Asia, Oceania, Europe and now the US.

Jigging is one of the world?s oldest lure fishing techniques. Its origins have been sketchy but it can be traced back to the early Polynesians and Europeans many centuries ago. So we know this type of artificial lure fishing works!

During the early 1990?s, the Japanese reinvented jigging through the pioneering exploits of Yoichi Mogi. He was instrumental in many of the new developments in rods, reels and jigs which help popularise this new Japanese style jigging. Traditionally big fish are landed with heavy tackle. The experience is usually a combination of fighting both the fish and the tackle thus reducing the enjoyment of the sport. Being masters of invention, the Japanese tackle companies embarked on a total redesign of their blue water tackle. The results are impressive with light weight powerhouse reels combined with small powerful graphite rods. These combos not only put enjoyment back into fishing but were producing an impressive list of angling feats normally reserved for much heavier tackle.

Tips for the first jigging trip

* Get a good pair of split ring pliers to change jigs quickly. Proper tools are necessary to safely open the 250lb rings. Check out our Pro Hunter pliers in the accessories section.
* Get a pouch for your pliers while you?re at it. Otherwise they will never be in their proper place ? at your side.
* Gloves for jigging. Get past the macho attitude, it is very easy to get used to fishing with gloves. Find a pair offering good protection against braid cuts and are comfortable to wear.
* Gimbal belt. Mandatory for fighting big fish.
* Have replacement assist hooks pre-tied.
* Windon leaders or leader material and tools to quickly make you own.
* A spare jigging outfit. Or a spare reel spool filled with braid or a spare spool of braided line.
* A range of jig types in several colours and weights.
* Sunnies and a hat.
* Take a camera.
* Leave the bait at home!

Effective jigging

The success to any fishing trip is the ability of the skipper to put the jigger onto fish. Finding fish might simply mean looking at a screen but first the skipper must know where to look and how to give the jigger the opportunity to take advantage.

One of the main advantages of vertical jigging is the ability to place the jig exactly where the fish are. Knowing the depth of the school, the jigger can drop the jig to the exact measured depth by using the multicoloured braided line. This line is often known as PE (Poly Ethylene or braid) line. Working the jig at a known depth is much more effective than jigging blindly.

It is usual for large predatory fish like Yellowtail Kingfish to hang around underwater reefs and structure. Look for fish sign on the up current side of any structure. It is the skill of the skipper to position the boat up current of the structure and make allowances for current drift, windage and give sufficient drift time for the jigs to hit their mark. From here on, the skill of the jigger is what?s left to entice a hit.

Fish will attack jigs when they are feeding, they will also attack if a baitfish appears to be injured or fleeing its presence. Other times the jigger will get a reactionary strike if jig presentation is right. Jig presentation is enhanced by working the jig with both rod and reel. The Japanese have developed such jigging techniques as ?mechanical jigging? or ?fast pitch, short jerk? to enhance the action of their highly technical jig designs. Working these particular techniques have proven to be highly effective and less tiresome than the previous ?speed jigging? that dominated during the 1980?s.

Jigging Reels

Some jiggers prefer overhead (multiplier or conventional) over spinning reels. For overhead reels, a narrow spool reel is preferred as line laying will not be such a problem so you can concentrate on working the jigs.

Recommended overhead reels are:

* Shimano ?
o Ocea Jigger
o Trinidad
o Torium
* Daiwa ?
o Saltiga
o Saltist
* Accurate - Boss
* Studio Ocean Mark ? Blue Heaven
* Duel Speedy
* Pro Gear Oceanus

Recommended spinning reels are;

* Shimano ?
o Stella
o Twinpower
* Daiwa ?
o Saltiga
o Blast
* Finnor
* Van Staal
* Accurate Twinspin

There maybe other reels that would be worthy of inclusion but those listed reels have been popular and well proven world-wide. Most of these reels are available in NZ. Some reels are very capable while others will have some limitations to the rigours of extreme jigging.

There is a constant misunderstanding about high gearing for jigging reels. Due to the growing numbers of jiggers exploring deeper and deeper waters, there is the need for heavier jigs and at times less streamlined jigs. A heavy jig load and the increasing fish size has made cranking with 6:1 gears plain hard work! Experienced jiggers prefer 4:1 to 5:1 ratio gears that have the torque to do the work without undue fatigue.

A good drag system is imperative to firstly stop, then pull in big target fish. Fish such as Kingfish and Hapuka (Grouper) inhabit deep reef systems. When hooking up on these denizens, you have to stop them from running back into the reef. Similarly, hard running pelagics need suitable drag pressure to stop them. From both scenarios, poor drag performance will usually produce one result!

Jigging Rods

As with any type of angling, there is never one rod that will suit all occasions. A good jigging rod must be light, have a parabolic action and high strength for lifting power. Parabolic rods are easier to jig in the Japanese style, they also help the angler fight big fish and are necessary for braided line.

Depending on the jigging style and reel type employed, rod lengths can vary. Overhead reels are best partnered with short rods, as short as 5?. Spinning reels are best with longer rods, as long as 7?. Most novice jiggers will begin with an existing longer rod, graduating into a specialist rod later. The following are simple guidelines -

Recommended jigging rods -

* Jigging Master*
* Daiwa Saltiga*
* Shimano*
* Carpenter*
* Smiths
* Lamiglas Tropic Pro
* Sevenseas
* Fisherman
* CB One
* Seed
* Calstar

There will be many other rods that would be worthy of inclusion but these listed rods have been popular and well proven world-wide and those with an * appear here in NZ. All of the above brands have rods that are very capable for extreme jigging in both overhead and spinning models. Different target fish will require different jigging styles which may need different rod types. Ask for expert advice about rod choice to avoid a costly mistake.

Jig types

There are many different jig manufacturers on the market but they all produce jigs where the weight positioning is centre weighted, tail weighted or somewhere in between.

Centre weighted jigs

These jigs are weight balanced near its centre. This jig is designed to flutter, glide and dart during the drop but fall slower than tail weighted designs. Use this jig in shallower water and for bottom fish (Snapper) that prefer a slower, fluttery presentation. These jigs are the most common and versatile designs and are must have weapons in the jiggers arsenal.

Zest* products in this category include, Hardy Long, Curved Slider, Ruddertail, Triangle and another brand called Sanme*

Tail weighted jigs

These jigs are weight balanced at or near the tail. This jig is designed to drop and lift quickly with a little action. These are the jigs to target deep water bottom fish as their streamlined designs will resist the effects of current better.

The jigs also tend to have small face profiles for better streamlining thus reducing the jig load felt at the rod. Because they are used in deep water, most jigs tend to have luminous finishes which help illuminate this lethal offering to any prospective fish. Use these jigs to target deep water Kingfish, Hapuka and Sea Bass. Zest* products in this category include Super Deep, Deep Slim, Curved Slider and Jigging Master -Rocket

There will be other jigs on the world market that could be included but there are so many manufacturers that it would be impractical to list them. The above jigs are very popular and successful and available in NZ.

Jig size

When choosing the jig size - target fish, water depth and current flow should be considered. Heavy tail weighted jigs can be used with pin point accuracy on a small target. A common guide is for 100g for every 100? of water.

Choosing between a short or long jig might be helped by comparing jig length to the local baitfish at the time. It is also a long-held belief by Japanese jiggers that a long jig resembles a big baitfish which will entice the bigger predators! This choice then becomes a personal one or one that is determined on the day as fish will always have their daily preferences.

Jig colour

With a wide range of jig colours, patterns and finishes; it can be hard to choose a suitable colour. There is a long held belief that the jig colour should match the overhead light conditions i.e. dark overhead = dark coloured jig, bright sunny = bright coloured jigs. At night and during deep jigging sessions, jigs that are mostly luminous are popular because of their ability to be seen in the dark water. Often before the first drop, I will observe what colour jigs have been selected by other jiggers and then choose a different colour. This way most of the colour spectrum is covered and if there is a hot colour, then you can quickly change to that. In most cases, the prettiest jig is the one that gets tied on and we all know that you will only get bit if you have it in the water.

Assist hooks

One of the most significant jig developments has been the assist hook. The assist hook comprises a wide gape hook spliced to a short, looped Kevlar cord. The cord is usually looped onto the connecting end of the jig so that the hook is positioned behind the head and belly area of the jig. This is an area jiggers believe predatory fish strike which leads to improved hooksets. Another benefit is less snags because of the absence of the traditional tail treble. Many Japanese jiggers believe that predators also attack the assist hook so they often dress the hook like a flasher or fly.

Choose an assist hook by ensuring the hook gape is wider than the jig. Jiggers often use two assist hooks, varying the cord lengths for greater coverage. Additional assist hooks can be looped in at the tail if you are getting missed strikes when the jig is dropping. The tail assist will fold up against the jig and into the strike zone but a problem is the potential of the jig to tangle with the leader if jigged too vigorously.

There are many ways to make assist hooks, the main ingredient is Kevlar cord. Cut a 30cm length of Kevlar, double the cord then carefully tie a 2 turn uni knot or nail knot onto the hook shank then tighten with pliers. Trim off Kevlar tags and finish off with a short length of heat shrink tubing to protect the knot. Another simpler way is a single overhand knot onto the hook shank, a drop of super glue then heat shrink tubing.


This new Japanese style jigging could not begin without the advent of ultra thin braided line which was introduced at that time. Braided line is a must when jigging, it not only reduces drag and stretch but it enables the jigger to easily work the jig without being hampered by thick line. The thin braids drastically increase line capacity, or in reverse ? reduce the size and weight of the reels needed.

The Japanese call these lines PE lines which is an abbreviation for Poly Ethylene being the scientific name for spectra or dyneema or simply - braid! Japanese use PE as a unit of measurement for braided line thickness, a PE5 braid is roughly equal to 50lb test. Most Japanese PE lines are characterised by colour coding where each colour measures 10m of line. There are usually 5 different colours which are repeated over the entire length of line.

Some popular brands of PE lines ?

* Varivas
* Zenaq
* Daiwa
* Jig Star*
* Salt Max*


The use of leaders is important in jigging because the terminal end is exposed to reef, abrasion and bite-offs. Asian jiggers much prefer the stealthy advantages of fluorocarbon leaders since their waters have long been ravaged and the fish have become line shy.

When considering leaders, it should be a windon with a length between

3 ? 6m. The length is necessary because there should be at least several turns of leader on the reel when the fish comes within gaff range. This allows the leader man an easier line to handle as well as affording some abrasion resistance should the fish suddenly dive beneath the boat rubbing the line against the hull.

There are quick and easy ways to join braid to leader but that generally does not mean they are best. Novice jiggers should begin with game fishing leaders which are joined by loop-to-loop connections. These leaders can be brought over the counter and are easily replaced but there comes a time when the complete jigger should be able to tie at least one of the elaborate connecting knots like the FG, GT, PR, Midknot. These knots are very streamlined and strong, they can withstand day-long popper casting. The bulkier uni-to-uni or bimimi-to-albright knots will suffice but fear for the rings on your rod guides.

Check our knot section for some of these knots and links to knot tying sites.

Jigging styles

The are 2 basic styles in Japanese style jigging, not including other factors like speed or hesitation.

Long stroke- working the rod from the gimbal plate. The rod is lifted in a wide arc or long stroke then dropped to allow the jig to flutter downwards to induce a strike. Simultaneously, the reel is quickly wound in 2-3 turns for each cycle. This style is best suited to centre weighted jigs, spinning combos with a longer rod.

High pitch, short jerk ? also known as ?mechanical jigging?. The rod is carried under the armpit and the rod is stroked in a small arc. Simultaneously the reel is quickly wound in 1 turn for each cycle. This style is best suited to tail heavy streamlined jigs, overhead reels with a shorter rod.

The above is a guide for the Japanese jig style, there are no set rules to abide so you can easily mix up the techniques and tackle to suit yourself. Certain species prefer a slower fluttery jig presentation while others prefer blistering speed. Both styles can be successfully worked at either slow or high speed or a combination of both. The attraction with jigging is the room to experiment to find what works for you.

Early jigging ? seemed focussed on high speed. The jigs in the 1980-90?s were often short and symmetrical. High speed retrieves were needed to give those jigs action, thus the term ?speed jigging? was born. This is still a successful technique, even more so with the advent of the long jigs; but tiresome. Most jiggers of that time would be set up with long, heavy rods and large high speed reels. Monofilament was the standard line at that time. We all know just how insensitive, stretchy and bulky nylon monofilament is. The technique required the jig to be dropped to the bottom then quickly wound to the surface, this was tiresome work. A yoyo technique was for the jig to be repeatedly bounced up and down on the bottom much like a yoyo. Using mono of those times, meant that rods had to be physically long to make a long enough stroke in order to take the stretch out of the mono and move the jig.

You can see now the advent of thin strong braids, modern tackle and technical jig designs have confined this old jigging style to the attic .

Posted By: chimpa
Date Posted: 12 Aug 2009 at 1:54pm
dann good info for a newb like me!

Posted By: Gmann
Date Posted: 12 Aug 2009 at 1:59pm
Glad you all enjoyed the articles I'm working on modifying them now with some updated info. I would be more than happy to create two for this site if you deem it worth the read

Posted By: Capt Asparagus
Date Posted: 12 Aug 2009 at 3:06pm
Gmann, it is DEFINITELY worth the read, and I have just stickied this post as it stands. However, if you were to post your revised tutorial up on this forum, then I shall unsticky this one, and sticky that one instead (sounds unpleasantly biological actually, now I read that.... hhhmmm..)
By the way, I thought your post on your Panama trip was terrific, I am only extremely totally jealous.

Posted By: phantomdeviant
Date Posted: 12 Aug 2009 at 3:16pm
Cheers for the link kevin, some good oil in there for sure

Skirt Pulla

Posted By: Young Yakker
Date Posted: 17 Aug 2009 at 9:10pm
Pretty keen to get into jigging.. Just wondering if a jig set-up would also do alright livebaiting etc, or is it more of a jig set-up is for jigging?

Posted By: kaveman
Date Posted: 18 Aug 2009 at 7:50am
YY..... no reason that you cant use your jigging setup for live baiting if you only want to fork out for one setup.


Posted By: Young Yakker
Date Posted: 18 Aug 2009 at 5:43pm
Yeh, the stella looks alright, and forking out $800 for a rod it would be good to be able to use it for other typed of fishing. 

Posted By: Moggy
Date Posted: 18 Aug 2009 at 6:09pm
Nice to see all that info in one place - very helpful
Guys writes a nice story.
Good to see, great on you guys for digging this stuff up - thanks

People who say it cannot be done should not interrupt those who are doing it!
FISH FIGHT The Peoples Protest

Posted By: cosmo
Date Posted: 28 Nov 2009 at 9:00am
thank you for all that info on the popper side of things have got a set up for it but a lot more confident now i have saved it for in depth reading just got to load the 950 up with some braid 

i just want to go fishing..........amd ignore all my adult problems

Posted By: JK
Date Posted: 28 Nov 2009 at 9:22am
yeah his popper / topwater article is pretty good eh Cosmo. Saw it some time back before I read the jigging one. Good info in there


Posted By: cosmo
Date Posted: 28 Nov 2009 at 10:16pm
yes mate now just gotta load the 950 up with some braid and check out some likely spots down this end of town

i just want to go fishing..........amd ignore all my adult problems

Posted By: hachingpooh2000
Date Posted: 16 Apr 2010 at 5:29am
Never read such a good post like that from Gman. Wow!
By the way....the - Jigging tutorial from ChrisW you can study with pictures. Chris wrote a second, very good tutorial named - Jigging Knots for dummies .

------------- - Saltwater Fishing tutorials

Posted By: Foxtrot Oscar
Date Posted: 27 Nov 2017 at 7:49pm
Seems all the links in this Sticky thread are now dead or inaccessible. 

I'm about to embark on a jigging crusade and wonder if the initial articles are still available to study?

      ><(((*>    J

Posted By: ChrisW
Date Posted: 29 Nov 2017 at 11:06am
try -" rel="nofollow -

you can phone me 021 423-817 if you have specific Q's.

give it death!

Posted By: Foxtrot Oscar
Date Posted: 29 Nov 2017 at 1:46pm
Thanks for that link Chris. Covers a lot but...

I'll have questions for sure.Thumbs Up

      ><(((*>    J

Posted By: Kurodai Fishing
Date Posted: 09 Dec 2017 at 2:42pm
I'm looking for anyone that willing to "test" my own creations 200g & 100g Jig

I would love to have it tested in southern waters, please let me know if anyone interested.

Pictures on the jigs is at
Facebook Kurodai Fishing


Print Page | Close Window