Print Page | Close Window

ALI Hard top

Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=38741
Printed Date: 01 Jun 2026 at 5:50am


Topic: ALI Hard top
Posted By: AfterDark
Subject: ALI Hard top
Date Posted: 08 Mar 2009 at 9:21pm
How and what and where would i get a Aluminium hardtop made for my 6.0 boat..
the old canopy is just about had it



Replies:
Posted By: tugboat
Date Posted: 08 Mar 2009 at 9:41pm
PM forum member "of2fsh" he had one made up a little while ago for his tinny!


Posted By: Rodinator
Date Posted: 09 Mar 2009 at 1:58pm
What make/model is your boat?
Just about any alloy boat builder could custom build one or base it off an existing design/model to suit


Posted By: AfterDark
Date Posted: 09 Mar 2009 at 5:29pm
 


Posted By: AfterDark
Date Posted: 09 Mar 2009 at 7:43pm
i have a 6.0 glass arco cabin  thats why i'm going for ali as think it will be a lot lighter don't want to make it top heavy pic above is the sort of one i want to get built..
not a pic of my boat


Posted By: Moki Marko
Date Posted: 20 Apr 2009 at 9:45pm
one thing I' ve noticed with most hard tops including the one in the picture is that the glass goes right up to the roof, I've filled in the top quarter of my glass with dark tint film to help block out the sun (always seem to be heading into it on the way out and into it again on the way home),  if I was re designing my hardtop again I wouldn't take the glass up so high, I mean, when do you look up in a boat?, down visibility is way more important.


Posted By: J-D
Date Posted: 20 Apr 2009 at 10:23pm
M.M. That's a bloody great idea . . it always sucks beating back into the sun and chop . . may have to head to repco and see what i can find . . . any chance of a picture of your boat?


Posted By: MarkE
Date Posted: 20 Apr 2009 at 11:26pm
We do this one - http://www.trademe.co.nz/Browse/Listing.aspx?id=213818291 - http://www.trademe.co.nz/Browse/Listing.aspx?id=213818291 ....
 


-------------
Sea Strike 18' Centre Console - Under Construction.... http://www.fishing.net.nz/asp_forums/sea-strike-18-build-thread_topic87723_page1.html" rel="nofollow - Build Thread here


Posted By: JerryHatrick
Date Posted: 21 Apr 2009 at 9:35pm
Saw an ad last night in this month's Boating New Zealand mag for Fibre Components Ltd in East Tamaki - seems that they make & supply fibre Hardtops to Fyran, so here's a tinny with a fibre hardtop , so I was wondering about your thoughts on an Ali top possibly being lighter? Interesting thought.
 
Good luck
 
JH


Posted By: Moki Marko
Date Posted: 22 Apr 2009 at 4:11pm

HI Dorjam, the stick on tints work real well, I doubled up on the drivers side to give me an xtra dark strip across the top, this worked so well i've since repeated it across both windows, looks tidier now too, yup, either repco or supercheap.



Posted By: xtasea
Date Posted: 24 Apr 2009 at 11:00am
Morrinsville Alloy services will be able to make the hardtop you have pictured.
Shane builds the Bluefin model boats for Sportcraft boats in Morrinsville.
PH 07 889 1085


Posted By: AfterDark
Date Posted: 24 Apr 2009 at 11:33pm
Thanks will give them a bell to set something up


Posted By: fishinmaiden
Date Posted: 27 Apr 2009 at 6:08pm
A mate of mine happens to be in the same boat as you are. I'll update him with this thread to ease his mind, or better yet, ask him to join the forum! :)



Print Page | Close Window