Inox or tackle guard
Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: The Briny Bar
Forum Description: The place for general chat on saltwater fishing!
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=140158
Printed Date: 01 Nov 2026 at 11:34pm
Topic: Inox or tackle guard
Posted By: Kandrew
Subject: Inox or tackle guard
Date Posted: 08 Aug 2026 at 7:46pm
|
I was reading in another blog that inox is not good for EVA knobs and grips, been using inox for a few years now with out any issues. I’ve just upgraded the knobs on my spinning reels to round EVA knobs, so don’t want to have any issues. Any of you had problems Inox on EVA. |
Replies:
Posted By: lawabidingpoacher
Date Posted: 09 Aug 2026 at 7:08am
| I would say it'll be ok . Inox is made with nothing that would react / melt the eva |
Posted By: Schecter
Date Posted: 09 Aug 2026 at 8:19am
| I've been using Inox to clean all my reels and rods. I simply spray it on a cloth and rub. There are no issues as far as I can report. |
Posted By: Wide Load
Date Posted: 30 Oct 2026 at 4:52pm
|
I keep inbox away from my handles after having to replace one on a Stella reel. It got sticky. I still use it everywhere else. ------------- http://www.legasea.co.nz" rel="nofollow"> 
|
Posted By: Kandrew
Date Posted: 31 Oct 2026 at 10:42am
|
Yes agree I’m not going to use any solvents or oils on EVA grips or knobs, just hot soap and water. Just a light spray of tackle guard on the reel but not the handle. |