Print Page | Close Window

Tinny Bung - Any advice?

Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Newbies Corner
Forum Description: If you're new to fishing this is the place to ask any questions about getting started ...
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=139103
Printed Date: 01 Feb 2026 at 9:31pm


Topic: Tinny Bung - Any advice?
Posted By: PipiPost
Subject: Tinny Bung - Any advice?
Date Posted: 16 Mar 2025 at 9:04am
Hi everyone,
The bung on my 13ft fyran doesn’t have a thread - the female receiver has a single round rib deep on the inside. I’m using a simple push in bung with a rubber washer but it’s not screwed in - it’s a push in - so I’m concerned I’ll loose it or will have water seepage.
What type of bung and drain hole is typical on a Fyran? Do I need to replace it? Any advice?
Thanks.



Replies:
Posted By: Pcj
Date Posted: 16 Mar 2025 at 10:07am
Just in to Burnsco and select a screw bung,has ribbed rubber and turn  T to tighten it,i have 1 and doesnt  leak,tie a cord to it.

-------------
"Times up"



Print Page | Close Window