Print Page | Close Window

Removing clear coat on alloy boat

Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=137091
Printed Date: 07 Jun 2026 at 4:50pm


Topic: Removing clear coat on alloy boat
Posted By: Reel Crusader
Subject: Removing clear coat on alloy boat
Date Posted: 17 Oct 2022 at 2:42pm
Has anyone tried to remove the clear coat over a paint job on an alloy bloat?  

After 15 years (not bad I reckon) the clear coat applied over the paint has started to peel away on the external areas more exposed to the sun, leaving it looking blotchy and the areas of exposed paint have oxidised.  UGLY but it still floats and catches fish Wink

I'm keen to remove the rest of the clear coat and then attack the paint to try polish it up and get a cleaner and more consistent looking finish on the paint, as an interim fix to get it looking better before having it repainted (or maybe just another clear coat if the paint comes up ok).

Haven't tried anything yet but wondered if there was a recommended product or method to do this?

Cheers



Replies:
Posted By: Tzer
Date Posted: 17 Oct 2022 at 4:52pm
Originally posted by Reel Crusader Reel Crusader wrote:

Has anyone tried to remove the clear coat over a paint job on an alloy bloat?  

After 15 years (not bad I reckon) the clear coat applied over the paint has started to peel away on the external areas more exposed to the sun, leaving it looking blotchy and the areas of exposed paint have oxidised.  UGLY but it still floats and catches fish Wink

I'm keen to remove the rest of the clear coat and then attack the paint to try polish it up and get a cleaner and more consistent looking finish on the paint, as an interim fix to get it looking better before having it repainted (or maybe just another clear coat if the paint comes up ok).

Haven't tried anything yet but wondered if there was a recommended product or method to do this?

Cheers


If its Nyalic this is what they recomended.

This can be done easily with Sea 2 Sky SPC 202 Coating remover  from Resene.
 A water based stripper that is rolled on left to soften the Nyalic and then water jetted off see. Once the coating is removed you have options on remedying any scratches by sanding  and or acid washing and then over coating again with Nyalic.
 
https://www.youtube.com/watch?v=ilroxCW6_SY&t=81s" rel="nofollow - https://www.youtube.com/watch?v=ilroxCW6_SY&t=81s
 



Posted By: Waihime
Date Posted: 21 Oct 2022 at 8:40am
Is it a paint on clear or self adhesive clear vinyl?



Print Page | Close Window