Print Page | Close Window

propeller rubber bushing question

Printed From: The Fishing Website
Category: General Forums
Forum Name: The Boat Shed
Forum Description: Discuss all things boating.
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=136209
Printed Date: 10 Jun 2026 at 9:43am


Topic: propeller rubber bushing question
Posted By: e.m.p!
Subject: propeller rubber bushing question
Date Posted: 18 Nov 2021 at 7:19am
Hi there,
bought a new propeller for a 15hp / 2 stroke and noticed that the rubber bushing isn’t evenly pressed into it. It’s hanging in there a tad lopsided, so I was wondering if that’s causing any problems or if it will level itself out once it’s fitted and tightened? Is that something of concern or good to go? Thank you!



Replies:
Posted By: Steps
Date Posted: 18 Nov 2021 at 8:01am
Is this an original factory pressed or re pressed?
Are there any tiny 'cracks ' around the edges of the rubber and hub?
When pressed, or rather slid in they are also vulcanized/glued, so there should be no cracks.
When sits on the prop shaft, are the blades a perfect 90 deg angle in all directions?


Posted By: e.m.p!
Date Posted: 18 Nov 2021 at 11:11am
Steps, I haven’t mounted it yet. Not sure if I should raise it with the seller or if I’m overthinking it? It’s brand new out of the box, so no cracks or anything.
First time I’m replacing it, so don’t have any experience what's normal, within range or faulty.


Posted By: Kandrew
Date Posted: 18 Nov 2021 at 5:53pm
Looks ok to me, new in the box you said.


Posted By: e.m.p!
Date Posted: 18 Nov 2021 at 7:13pm
sweet as - I can’t imagine to be a big issue either, I’m most likely overcooking it, so will give it a shot this weekend.


Posted By: Steps
Date Posted: 18 Nov 2021 at 8:20pm
Thats the rear view, looks ok to me as well


Posted By: Grasshoppa
Date Posted: 18 Nov 2021 at 8:42pm
that is not the rear view.....


Posted By: e.m.p!
Date Posted: 19 Nov 2021 at 5:45pm
doesn’t matter. It’s fitted now (hopefully the right way round) and will it give a go as soon as I can spare some time.


Posted By: smudge
Date Posted: 20 Nov 2021 at 8:40am
Guys just remember, when someone such as EMP asks a question, he wants an answer. Not a whole lot of back and forth over a 'technicality' or a simple mistake. That's the sort of stuff that makes people give up on the forums, not one little error but thanks for the private messages anyway.

Hop the prop is ok EMP, it looks ok to me.


-------------
Best gurnard fisherman in my street


Posted By: smudge
Date Posted: 20 Nov 2021 at 8:42am
I've hidden a few posts

-------------
Best gurnard fisherman in my street



Print Page | Close Window