Print Page | Close Window

What product to coat a FibreGlass rod surface fini

Printed From: The Fishing Website
Category: Freshwater Fishing
Forum Name: Coarse Fishing
Forum Description: Anything coarse here....
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=133976
Printed Date: 29 Jan 2026 at 4:46pm


Topic: What product to coat a FibreGlass rod surface fini
Posted By: randyspringer
Subject: What product to coat a FibreGlass rod surface fini
Date Posted: 29 Jul 2020 at 8:22pm
I have a few old fibreglass beauties which are beginning to show surface wear and tear.
Does anyone know what product one would use to coat the surface again?

Im not talking about the regular epoxy used to bind runners to the rod. I mean the surface clear coat.

Thanks in advance.


Replies:
Posted By: O'Neill
Date Posted: 30 Jul 2020 at 6:42am
For the rod I would use Threadmaster Rod Finish. Applied with a artist foam rubber brush. You will need to strip the rod back to its bare finish, and sanding the blank so it has a surface to bond too.


Print Page | Close Window