Hour metres on yamaha outboards
Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: The Briny Bar
Forum Description: The place for general chat on saltwater fishing!
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=131424
Printed Date: 25 Jan 2025 at 1:10pm
Topic: Hour metres on yamaha outboards
Posted By: Tonto2
Subject: Hour metres on yamaha outboards
Date Posted: 10 Jul 2019 at 1:52pm
|
Hello all, can anyone tell me what year the hour metre became part of the Yamaha digital gauges? Specifically for the 90 and 115 2 strokes? thanks in advance  . Also what would the code read on a year 2000 model.------------- slowly going where everyone else has already been |
Replies:
Posted By: Durban
Date Posted: 10 Jul 2019 at 6:20pm
| The Command Link works on HPDI and 4 stroke models in 1999 they used magneto system then in 2000 they switched over to Generator and coil/pulser; My honda works on 12V .key on the hour meter runs leave the key on without running the motor it clocks up the hours. |
Posted By: Tonto2
Date Posted: 10 Jul 2019 at 11:02pm
|
can you translate that? ------------- slowly going where everyone else has already been |
Posted By: Steps
Date Posted: 11 Jul 2019 at 8:38am
|
Knowing a little about the background of the question would help. On most, maybe all, if you leave the ign key on, the hr meter keeps on turning over. I have around 150/200hrs on my meter over and above use. The grandchildren where playing in the boat , turned the key on. With most electronic type igns if left on the circuit disconnects the coils part.. unlike early car electronic car igns pre 80s. And maybe of help readouts history. I contacted the service centre where the previous owner got stuff done. I think them being authorised dealers, they keep records of each engine for many yrs. Anyway they where able to email me all the engine records and service records for the boat for the last 2 owners. If you chat to your local service centre they should be able to obtain similar records or get info off the engine. |
Posted By: Pcj
Date Posted: 25 Jan 2024 at 3:24pm
|
Mariner hr meter stopped at 145hrs on Monday now thinking do I need to spend big $$150+ or would a simple meter like this be ok ,kept out spray etc. Should connect to existing wiring ok Service due at 205hrs. Guessing keep old meter for show and continue with new https://www.trademe.co.nz/a/motors/boats-marine/parts-accessories/engine-parts/listing/4525900451?bof=85jWA9IN%20" rel="nofollow - https://www.trademe.co.nz/a/motors/boats-marine/parts-accessories/engine-parts/listing/4525900451?bof=85jWA9IN
------------- "Times up" |
Posted By: Kandrew
Date Posted: 25 Jan 2024 at 7:53pm
| I think a few guys fit these on their motors might look at one for my little 15hp |
Posted By: Pcj
Date Posted: 25 Jan 2024 at 7:55pm
------------- "Times up" |
Kandrew wrote: