Print Page | Close Window

Thunnus vs Baitrunner Spools

Printed From: The Fishing Website
Category: Saltwater Fishing
Forum Name: Reel Questions!
Forum Description: Reel answers from a reel expert - Steve at Swordfish Marine
URL: https://www.fishing.net.nz/forum/forum_posts.asp?TID=125535
Printed Date: 09 Jun 2026 at 7:13pm


Topic: Thunnus vs Baitrunner Spools
Posted By: S-Ray
Subject: Thunnus vs Baitrunner Spools
Date Posted: 12 Sep 2017 at 9:23pm
Are the shimano thunnus and baitrunner spools interchangable?

I have a ci4000 thunnus and looking for a spare spool and the thunnus ones are $149 but the baitrunner ones are only $80ish?

Thanks





Replies:
Posted By: swordfishsteve
Date Posted: 16 Sep 2017 at 9:28am
Best if Shimano service boys answer this one , come in Shimano Service?


cheers swordfishsteveSmile


-------------
REEL REPAIR GUY - Swordfishsteve, That Is Who I Am and That is What I Do : See More At :www.reelrepairguy.co.nz


Posted By: Steps
Date Posted: 16 Sep 2017 at 4:20pm
Hmmm thats a thought...
 must look at that.. got a 4000 oc and 4000 thunus.
 I know most of the low mid range okuma 4000 and 6000s do.


Posted By: OuttaHere
Date Posted: 17 Sep 2017 at 9:42pm
Thunnus reels have a spool bearing, Baitrunners don't.

They may still be interchangeable, it just won't be quite as nice.

Thunnus 4000 more likely to work than the other ones as the 4000 spool bearing is inside the spool, under the drag stack, whereas on 6000 and larger it's underneath the spool.


Posted By: laidbackdood
Date Posted: 18 Sep 2017 at 12:12am
Doubt it.

-------------
Once the idiots turn up..Im outta here...No time for Drama Queens.


Posted By: taurangatroutmaster
Date Posted: 18 Sep 2017 at 9:04am
i work in a tackle store so i just tested this for you.  the 4000 oc spool does fit onto  the thunnus.  the drag seems to work fine.  they do look slightly differant underneath but that doesnt seem to effect anything


Posted By: S-Ray
Date Posted: 18 Sep 2017 at 1:44pm
Thanks guys - sounds like they might work o.k for a spare knowing that they are not as good but its only a spare. Cheers


Posted By: Steps
Date Posted: 18 Sep 2017 at 5:22pm
Thats good to know
 Heading out to the shed was still on the to do list
 Put off till tomorrow Avo..when hopefully setting both those reels up for Wed weather window.

 Low elcheap interchangeability of the okuma (above) from memory its also about bush/ and or quailty of bearing.. maybe drag discs also ??? had them out separate but to together to actually compare.

 Thanks TTM on the early follow thru...and further info..


Posted By: -mAdfis HO-
Date Posted: 18 Oct 2017 at 1:58pm
What type of baitrunner is it? I had the same idea as you to try and save some cash on a spare spool. I have the 8000D baitrunner and thunnus 8000 tried swapping them over, they don't fit. I also have the 4000D baitrunner and thunnus 4000 so I'll give it a go and let ya know.

-------------
FiShInG rOcKs! ChEeRs -mAdfis HO-








Print Page | Close Window