terrafish wrote: Its reel easy mate. If its just the floor that you are doing, then after the epoxy sealer has cured(do wet on wet to give it a good soak, and pay good attention to the edges, which you will have sanded to take the sharp corners off) Apply a good quality undercoat then coat with a product called "kiwigrip". Its an acrylic highbuild non skid that's easily applied and recoated when necessary. obviously the edges and under side will need something different, and you may well get away with a good acrylic gloss. Enamels don't have the same flexibility as acrylics so be wary about that over ply. Pm me your ph if you want more info |
pjc wrote: You would need a primer of some sort first. Have used Kiwi grip,looks easy but the trick is in the rolling to get the right lift,apply thick and roll gently to flick it up so when dry you get a decent grip. to thin and hard rolling goes smooth with not much effect. |
Change in seasons, change in tactics Not a lot to report in the ‘big fish’... Read More >
Fish galore! Coming off the back of Easter Weekend and with some very nice weather... Read More >
Excellent snapper action There is some excellent autumn snapper fishing straight out and up the... Read More >
Whangarei Harbour fishing well Like the weather, the fishing has been patchy throughout Bream Bay... Read More >