Casts fine ,regardless of what weight lure i cast(I go for it,with no fear either).One inch PR Knot.

 I have been using some IGFA rated finns braid lately on a lite spinning setup. when the wind on leader is at the tip and I cast I have no problems,after getting busted off by a larger model fish than typically found here, I attached  a new wind on leader, which I inadvertently left longer than usual. Although it didnt seem to make much difference I was plauged by wind knots, untill I shortened the leader, so that the join was no more than 3 guides from the tip...... Problem solved.

So even though I couldnt discern any difference, the cats paw join was slowing up the line exiting the rod tip and the line leaving the spool was bunching up behind it, causing me to get pissed....

 To much line on the spool will have a similar effect where the line comes off the spool lip faster than it can exit the rod tip, causing the oscillating loops traveling down through the guides to bunch, as will casting into the wind.

 I am not a fan of any of the fused braids for casting, rather i like something supple, reality is though that all of em can cause wind knots or dont depending on how its set up. Its not so much the line, rather its the mechanics of the line, spool lip and guides used

 Bigger diameter guides allow bigger loops to pass through em with less likely hood of  the dreaded...CRACK..........noooooooooo not my Gamma! especially with croc and shark infested waters

 

 

 

 

zac