Offshore 850HT Boat Review

The backstory

Offshore Boats was the Supreme Winner of this year’s Hutchwilco NZ Boat Show for the second year running. Its winning entry, the Offshore 850HT, clearly grabbed the attention of the experienced judging panel, also taking out both the ‘Specialist Fishing Boat Open’ and ‘Best New Model’ awards. 

Of course, one of our jobs here at NZ Fishing News is to find out if the performance and fishability of the 850HT matched the looks.  

----- Advertisement -----


“Do you want to go for swords out from Hokianga, or bluefin down at East Cape?” 

Jeez, this Jonathan Barlow chap (Offshore Boats’ company founder) isn’t here to f**k spiders, I thought to myself as I pondered my response. 

“Well, I’ve never caught a bluefin… “ 

“Sweet as mate, I’ll be in touch when there’s a weather window!” 

We waited and waited, until finally the stars aligned for the last weekend of July. So, there we were, a merry convoy of Utes and big trailer boats, winding our way along the picturesque coastal road that is State Highway 35, bound for Lottin Point. It’s yesteryear country; wild horses graze the road verge, small settlements are specked here and there along the sweeping hills, and – the marker of any good fishing adventure – cell coverage ranges from limited to non-existent.

Our destination was the Wheeler family’s Otanga Estate property – a 3,000-acre working farm and hunting lodge – where we would be tractor-launched into the Pacific Ocean, supervised only by sheep, roaming goats, and ancient p?hutukawa trees, twisted into tormented shapes by eons of storms and prevailing winds.  

----- Advertisement -----


Upon arrival, I met Kerry Oxenham, the proud owner of the subject of this review – the first Offshore 850HT. Kerry is an enthusiastic fisher and diver, primarily undertaking his nautical adventures around the east coast of the Coromandel with a focus on topwater fishing and gamefishing.

Construction 

The Offshore 850HT has been designed by Naval Architect Alan Walker for offshore fishing and diving, with heavy-duty construction including 8mm alloy plates and framing. Like other models from the Whangarei manufacturer, it has a fine entry, 18° deadrise hull with turndown chines. The Offshore Boats styling is immediately given away by the hull proportions, cabin shape, straight shear line, and bowrail angles.  

This boat has been constructed with intrepid missions in mind – a cavernous 620-litre fuel tank to serve the first Yamaha 450 XTO in the country, a lockable cabin, 2.1m berths, and huge ice capacity all scream multi-day adventures to remote locations.

With a 2.7m beam, it’s no surprise that interior space is generous. The 850HT offers plenty of hardtop headroom for my 6’3” frame (even underneath the decent overhead grabrails) and a nice, open flow between the cabin and cockpit. There’s ample scope for storing gear and stretching the legs out up front, and a plumbed head located under the central squabs. Also, the coamings have been cleverly cut back aft of the cabin to extend the internal cockpit room.   

Beneath the cockpit floor is the sizeable fuel tank and a large wet locker that would be great for dive gear. Ample U-DEK has been applied to the cockpit, transom, bow, and coamings, and the excellent gunmetal paint job matches the Yamaha. The 850HT sits atop a fully braked, triple-axle Custom Alloy Marine (CAM) trailer that sports a complete aluminium frame, catch and release system, power winch, and tread plate side steps.

Layout and fishability

Offshore have struck a nice balance between comfort and practicality with the 850HT. The king and queen Relaxn seats are incredibly plush, sporting foldable armrests and ample adjustments. The rear-facing bench seats are generously sized, and the coamings are a nice width for plonking down on while trolling or fishing without being too wide to hinder fish-fighting endeavours. Ample storage exists everywhere you turn, from the sliding drawers and rubbish bins under the coamings to the large compartments for ice (280L), fishing gear or safety equipment under both port and starboard bench seats. In addition, the full-length cockpit side shelves are great for longer items such as gaffs or tagpoles. 

I counted a grand total of 36 rod holders aboard, spread amongst the rocket launcher, bowrail, coamings, and bait station. They are all painted black, and some paint had already been rubbed off on our maiden voyage (for a very good cause, however, which we will get to soon!). Drink holders are harder to come by, although four beverages can be accommodated along the side decks.   

----- Advertisement -----


I was a big fan of the dual livebait tanks – not only can you spread out your little pets, but the configuration allows easy port and starboard swimstep access. The transom bait station neatly houses the batteries and features Offshore’s unique foldout filleting bench that comes into its own for dealing with sizeable fish like kingies or tuna.  

Between the cockpit, swimstep and bow, there is no shortage of fishing and casting space on the 850HT. With the extra wide side decks around the hardtop base, access to the bow for casting is super simple – even with the outriggers deployed.  

Moving to the helm station, the real standout is the gigantic 24” Simrad MFD screen. Not only does it do the usual fishfinding and chartplotting functions, but it is also linked to a FLIR thermal imaging camera, Halo radar, and cockpit video camera. The Yamaha Helm Master EX controls, Hella and Narva lighting, Maxwell windlass anchor winch, JL Audio sounds, and Zipwake trim control system panel round off the notable electronics onboard.

Helming visibility is great thanks to a one-piece, 6mm toughened glass windscreen by Glass Shape in Warkworth. Two wipers are on hand to provide viewing windows for the skipper and first mate. Although there is no central wiper, Rainex could easily be applied to shed any water. Sliding side windows and two overhead roof hatches provide further visibility and ventilation.

Performance

Jonathan doesn’t shy away from the fact that ride is the most important consideration at Offshore Boats HQ. Although our test/fishing weekend laid out relatively tame sea conditions (for the notorious East Cape waters, anyway), the first morning did involve a 1m offshore SE swell mingled with 10-15 knots of SW wind chop and honking currents. I think the 850HT was hungry because she simply ate it up. I’m not exaggerating – in head-on, beam-on, quartering, or following seas, she barely flinched and kept her nose on the straight and narrow through all but the biggest of potholes we encountered. The chines also effectively deflected spray away from the crew.

The hull is quiet and stable at rest, and the cockpit floor is dry. Although any water on the deck quickly drains into the bilge with forward momentum, there is a tendency for water introduced at rest (e.g., from deckwash) to move up front and pool in the underfloor locker. 

With five people and all their gear onboard, fuel economy was around 60L cruising at 30 knots, and 12L trolling at 7 knots. We managed a top speed of 39 knots, and Jonathan says they reached 43 knots during water testing. Manoeuvrability is impressive, as Offshore’s Chris Platt demonstrated by throwing the 850HT around with some very tight turns. Both fore-and-aft and side-to-side trimming are straightforward, thanks to the surefooted hull and automated Zipwakes.

“But does the 850HT catch fish, bro?” you ask. Yes, she most certainly does. Four bluefin tuna were landed before midday on her maiden voyage, and she helped yours truly lose his bluefin virginity – that’s a story for another day, however!  

As we enjoyed a few beers, bathed in glorious afternoon light with the crew processing plump tuna a stone's throw from the shore, Jonathan tells me there’s a philosophy behind Offshore Boats:  

“We don’t want to build the most boats; we strive to build the best boats.”  

With the 850HT, I think Jonathan and his team have achieved just that.

For more info click HERE.

Specifications:
      • Model
Offshore 850 Hard Top 
      • Hull design 
Alan Walker 
      • Builder  
Offshore Boats NZ 
      • Construction 
8mm marine grade aluminium 
      • LOA 
8.5m 
      • Beam 
2.7m 
      • Deadrise  
18° 
      • Height on wheels 
3.1m (with anchor light mast down) 
      • Displacement (dry) 
3,500kg 
      • Fuel capacity 
620L 
      • Recommended horsepower 
300-600hp 
      • Pricing from 
$450,000 
      • Price as tested 
$589,000

 


September 2023 - Nick Jones
New Zealand Fishing News Magazine.
Copyright: NZ Fishing Media Ltd.
Re-publishing elsewhere is prohibited

Rate this

Comments

Post a Comment

Required Field

Latest Articles

Interesting Facts About Blue Cod
February 2025

It’s time to put the fishing stories to one side for a mo’ – here is a quick review of the current scientific facts about the... Read More >

Freespool Reels Versus Baitrunner Reels for Fishing
January 2025

Mark Kitteridge believes a freespool/overhead casting reel and suitable rod are far more effective for straylining techniques.... Read More >

How to Dry Age Fish
January 2025

Dry ageing is a culinary technique that has long been associated with beef, but this method can also work wonders for fish.... Read More >

How to Catch Skipjack and Albacore Tuna: Part 2
January 2025

Sam Mossman covers saltwater flyfishing, livebaiting, and cubing for skipjack and albacore tuna.... Read More >

Chinese Stir-fry Clam Noodles with XO Sauce
January 2025

Briny, juicy clams in a slurpy delicious XO sauce with noodles – sounds good, right?... Read More >

Fishing Reports Visit Reports

Saltwater Fishing Reports
Hauraki Gulf Fishing Report - 07/02/25

Getting schooled by anchovies As the anchovies make their way closer to shorelines, including the... Read More >

07 Feb 2025
Saltwater Fishing Reports
Bream Bay Fishing Report - 07/02/25

Anchovies - small fish, hot action It’s the annual anchovy ‘run’, with schools of this... Read More >

07 Feb 2025
Saltwater Fishing Reports
Bay of Islands Fishing Report - 06/02/25

Good weather brings marlin and yellowfin on board The weather has improved greatly and so... Read More >

06 Feb 2025
Saltwater Fishing Reports
Inner Hauraki Gulf Fishing Report - 06/02/25

Creative thinking and a good game plan gets results I am the first to say... Read More >

06 Feb 2025

Fishing bite times Fishing bite times

Major Bites

Minor Bites

Major Bites

Minor Bites

Fishing Reports, News & Specials

Recent Posts Visit Forum

199 Active Users online, 199 Guest(s), 0 Member(s)
Does size matter? 5 inches or 7 inches?
in Soft Bait Fishing
5 hours ago
The Tamure Kid

Hard to join this chat without sounding like an episode of The Office - "that's what she said"! Anyway, my theory is to use a lure...

Another fish ID please
in The Briny Bar
6 hours ago
krow

Yes pecs very colourful...

Fishing Reports
in The Briny Bar
10 hours ago
piwikiwi

I try and keep the bopyakmen thread going but it's just not happening. That thread was humming for several years. The various kayakfishing Facebook groups come...

Auckland Yakkers
in Yak Yak Yak
11 hours ago
Hard Yakker

Thanks Banana boat, hope you're still getting after them. I was out trolling for Kings yesterday, but all I got was wash from motor launches, and their...

What Filler to use
in The Outboard Clinic
13 hours ago
Pcj

west glue system and add micro balloons for ease of fairing. Glass needs to dry and roughened up a bit..https://nzfg.co.nz/product-category/fillers-putty/...

Popular Articles

Softbait Fishing - Part 1 - gear selection

John Eichlesheim writes an article about selecting the right equipment for softbait fishing... Read More >

Softbait fishing Pt 2 - tips and tricks

Techniques, tips and tricks of softbait fishing – getting the most from your soft baits.... Read More >

Surfcasting - setting yourself up

Gary Kemsley helps sort out the necessary gear for intending surf fishers.... Read More >

Squid - How to catch them

Squid fishing is a rapidly growing aspect of fishing - Paul Senior shares some hints and tips to get started.... Read More >