Advice & Info: Livebait flasher rigs

   Rated 10 time(s). Email to a friend
 

Storage of these are a real pain. Based on a previous suggestion, get a piece of electical conduit tube and cut to a length a bit longer than the length of the rig (about 4ft??). Using cable ties, fasten a swivel clip near each end.

Now attach the rig to a piece of nylon, put the rig into the tube and clip the sinker end on to one of the swivel clips. Wind about 5 lengths of nylon between the swivel clips and permanently attach this end. This gives you a storage system and a "rod" with adjustable line (about 25ft) all in one. Great for keeping in the car and for fishing off any wharf at any tide.

<< back  
Rate This Article
1  2  3  4  5 



Photo Competition
Missing Image
Caught this hugh f...
Enter here