FAQ FAQ  Forum Search   Events   Register Register  Login Login

Tying the "Clark's Cicada".

Post Options Post Options   Likes (0) Likes(0)   Quote Pole Dancer Quote  Post ReplyReply Direct Link To This Post Topic: Tying the "Clark's Cicada".
    Posted: 24 Jul 2006 at 10:43pm
Pole Dancer View Drop Down
Titanium
Titanium
Avatar

Joined: 13 Aug 2003
Location: Waihi Beach
Status: Offline
Points: 7021

I guess it's appropriate that the first pattern I put up here is one of those featured in the book being given away....
 

Tying the �Clark�s Cicada�

 

By: Clark Reid

 

 

This pattern was developed at a time when no other commercial Cicada imitation was available. I had seen several other Cicadas� developed by Masterton tier Wayne Harter and Taupo�s Bronwyn Wilson, and  while effective,  I didn�t believe they carried the triggers to be really successful on very wary trout. Both were fine fast water patterns but �lacked something� on slower water.

 

Being a big believer in the �supernormal releaser� theory on trout triggers (Bob Wyatt recently did an excellent article on this in Flylife Magazine) I set about trying to identify the main triggers a cicada would present a hungry, though wary trout.

 

Body shape was obviously the first stand out feature. Secondly, but just as important was the way a Cicada�s wings glistened in the sunlight, almost to an iridescent degree. Thirdly the large compound eyes dominated the entire profile.

 

I was at Umpqua�s fly-tying factory at the time and two new materials presented themselves which I used� One being Accent Flash, not yet commercially available (But set to take the fly-tying world by storm) and secondly Shimizaki Flywing.  Shimizaki Flywing is no longer made and so Web Wing is now the preferred wing material.

 

Bronwyn Wilson�s pattern became the main basis but my pattern included these additional materials and, hopefully, the triggers.

 

That this has now become New Zealand�s most successful commercial dry fly is something I am very proud of and it is still my number one mid summer fly. It floats all day, fools trout and is robust enough to stand up to the repeated attacks of the fish. Because it is so popular I find some fish these days can have an adverse reaction to being presented with it and so I commonly vary the original pattern by tying the body in different body colors or with a mottling of different colored Deer-hair. I add a post to some to help some of my older clients see the fly more easily.

 
Feel free to vary this pattern. I have tied with rubber legs and other adornments and have tied in many colors, even black and orange for peter Morse to use on bass in Australia for their peculiar colored cicada's. As with all fly-tying, a pattern is a basis from which you can experiment... there are no rules.

 

 

Pattern:

 

Hook: Tiemco 2312 or TMC 200R

Size: 4-12

Thread: Danville�s Fly-master (Color to suit)

Body: Deer Hair (Antelope is better if you can get it). Best deer hair is Whitetail Belly hair. Color to suit. Standard is Olive variants can include brown, Grey, Green and Tan or a mixture of all.

Under-wing: Accent Flash or Midge Flash

Over Wing: Web Wing or Florist ribbon cut to shape

Eyes: Mono-filament Eyes.

Collar: As for body

Head: As for body.

 

Tying sequence:

 

When tying Deer Hair flies one of the most useful tools you can have is a fine toothed comb. You can buy a specialty product such as this�

Or get a �Nit comb� from the chemist. This is used to remove the fine under fur from the deer hair and makes spinning and flaring much easier.

 

Mount the hook in the vice and attach your thread. Cut a small clump of deer hair� not too much, about this size is perfect for the first spin�

Then cut it so you have a small clump. This will help the deer hair spin past the hook and makes trimming easier later�

Pinch the Deer hair onto the hook. Hold it so you have a good firm pinch of both the deer hair and the hook. Take your thread Up and over the deer hair while still pinching so it is not yet tight but does totally encompass the deer hair

Pull with a steady pressure and the hair will start to flare and spin. Take several more wraps to secure it.

Now the bit I can�t photograph as I only have two hands�..

 

Pinch the thumb and forefinger of your left hand at the back of the hook and the thumb and forefinger of your right hand in front the deer hair you have just spun. Push both toward each other as hard as you possibly can. Repeat these steps of spinning and then pushing until you have built up enough for the body.

Using a rotary vice makes this process much easier as you can spin the fly around at any time to check you have got uniform coverage. Without that you have to be careful you don�t have bald spots on the back unseen part of the fly.

Tie the thread off and remove the fly from the vice. You now trim the body to shape. I always make the first cut on the underside and just lop everything off as flat to the hook shank to ensure adequate gape is left on the hook for hooking purposes.

Now put the fly back into the vice and reattach the thread.

 

Note  I have cut a low sort of �ramp� on the very top of the fly. This will allow the under-wing and wing to lie flat like the natural.

Get out some accent flash, or in this case �midge Flash� (Just smaller diameter Accent Flash)

Cut to length and tie in on top.

Next use either Web-wing (On left) or florists ribbon to cut the wings to shape.

I cut a square about this size and fold it in half.

I

I then round off one end to this shape�

Then cut down the fold and you�ll have two identical wings�

Then lay them on top of one another and separate them as you would if holding playing cards in a tight poker matchJ.

These then get tied in on top of the midge flash. Use the same pinch technique with the thread we used earlier for our spinning of the deer hair ensuring the wings tie in flat.

Trim the excess and add the eyes using figure of eight turns

Next you are going to need a hair stacker to do the collar correctly.

Simple tool which is invaluable.

 

Cut a piece of deer hair with the tips left in place� about this size�.

Insert tips first into the stacker and tap several times hard on a hard surface. This will ensure all of the tips are aligned for a good neat finish.

Once done carefully remove the top section of the stacker and aligned tips should protrude like so�

Carefully remove them and tie in top, again using the pinch method, to form a neat collar. Try to get them in a full semi-circle over the top of the fly.

This photo is not the best example, I prefer them to come right down and almost act as outriggers to each side of the fly.

 

Trim the butts off and start to spin the deer hair for the head.

Keep spinning until you have covered all areas of the head. Once done tie off at the front, cement the finish and now comes the trim of the head.

 

The most important thing to be careful of is not to also trim the collar fibers away. TAKE YOUR TIME or you will regret it.

You should now have ended up with a completed �Clark�s Cicada�.

All photos text and images � Clark Reid 2006.

www.clarkreid.co.nz   FFF Certified Casting Instructor / Umpqua Designer Tier
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Dohboy Quote  Post ReplyReply Direct Link To This Post Posted: 25 Jul 2006 at 7:40pm
Dohboy View Drop Down
Platinum
Platinum
Avatar

Joined: 02 Sep 2004
Location: Coxs Bay, Ak
Status: Offline
Points: 2836
Thats impressive Clark
How long does it take you to make 1?
Dean
www.acewash.co.nz
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote Pole Dancer Quote  Post ReplyReply Direct Link To This Post Posted: 26 Jul 2006 at 7:08am
Pole Dancer View Drop Down
Titanium
Titanium
Avatar

Joined: 13 Aug 2003
Location: Waihi Beach
Status: Offline
Points: 7021
It depends... if I am tying just one, like for this display, and elimiating the photography time about 7 minutes a fly. However, if I have to tie a dozen to stock up the fly box or to produce some commercial ones I'll do some prep with wings cut ahead of time etc and it'll be about 4 minutes a fly.
 
Clark
www.clarkreid.co.nz   FFF Certified Casting Instructor / Umpqua Designer Tier
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote tobez Quote  Post ReplyReply Direct Link To This Post Posted: 28 Jul 2006 at 6:30am
tobez View Drop Down
Titanium
Titanium
Avatar

Joined: 27 Jul 2003
Location: whitianga
Status: Offline
Points: 10389
bluddy hell thats wicked clark!!!Clap
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote TheBadger Quote  Post ReplyReply Direct Link To This Post Posted: 12 Feb 2009 at 3:12pm
TheBadger View Drop Down
Platinum
Platinum
Avatar

Joined: 01 Dec 2008
Status: Offline
Points: 1152
Caught 20 Rainbows with one of these in the Taupo region over the weekend. Fricken wicked fly.
Back to Top
Post Options Post Options   Likes (0) Likes(0)   Quote jmeyerc Quote  Post ReplyReply Direct Link To This Post Posted: 01 Apr 2009 at 3:00pm
jmeyerc View Drop Down
Bronze
Bronze
Avatar

Joined: 28 Mar 2009
Location: New Zealand
Status: Offline
Points: 85

Another fantastic fly Clark! 4 mins you say? heck it would take me longer than that!!!!! I'm afraid I get so engrossed with it all I tend to lose all track of time. so I don't know how long really it would take me each fly. Embarrassed

I agree this fly is an awesome killer. Thanks again Clark.....

Jeanne 

Back to Top
Forum Jump
Forum Permissions View Drop Down


This page was generated in 0.109 seconds.