Murph wrote:
Phill you have posted on here a number of times about IGFA rules and hook placement in game lures stating that the hook has to be inside the skirt to be IGFA compliant. You were wrong mate, others have tried to tell you that before but you kept on with the hook must be in the skirt story. Read back over your posts if you don't believe me.
|
Here Phill read this and understand them. IGFA even has pictures for thOse that cant read
H. HOOKS AND LURES
1. When using an artificial lure with a skirt or trailing material, no more
than two single hooks may be attached to the line, leader, or trace. The
hooks need not be attached separately. The eyes of the hooks must be no
less than an overall hook's length (the overall length of the largest hook
used) apart and no more than 12 inches (30.48 cm) apart. The only exception
is that the point of one hook may be passed through the eye of the other
hook. The trailing hook may not extend more than a hook's length beyondthe skirt of the lure. A hook may not precede bait, lure or bait/lure combo
by more than one hook’s length. A photograph or sketch showing the hook
arrangement must accompany a record application.
2. Gang hooks are permitted when attached to plugs and other artificial
lures that are specifically designed for this use. Gang hooks must be free
swinging and shall be limited to a maximum of three hooks (single, double,
or treble, or a combination of any three). Baits may not be used with gang
hooks. A photograph or sketch of the plug or lure must be submitted with
record applications.
3. Assist hooks or other such single hooks that are attached to a lure
with a lead constructed of monofilament, multifilament, wire or other such
material must conform to the following: When using assist hooks on any
artificial lure, other than a skirted lure, the lead cannot be more than 1 ½
hook’s length and the bend of the hook may not be more than 4 inches (101
mm), whichever is less, from the closest point of attachment on the lure.
Double and treble hooks may not be used as assist hooks.
FAILING BEING ABLE TO READ ENGLISH PERHAPS THIS MORE TO YOU LIKING.
H – HAMECONS ET LEURRES (Hooks for Lures)
1. Lorsqu’un leurre artificiel à jupe ou autre leurre de traîne est utilisé,
deux hameçons simples au maximum peuvent être attachés à la ligne ou
au bas de ligne. Les deux hameçons ne doivent pas nécessairement être
attachés séparément. Les oeillets des hameçons doivent être séparés d’au
moins une longueur d’hameçon (l’hameçon le plus grand étant pris en
compte) et au maximum de 30,48 cm (12 inches). Seule exception : la
pointe d’un hameçon peut être passée dans l’oeillet de l’autre.
L’hameçon de queue ne doit pas dépasser la jupe du leurre de plus
d’une longueur de l’hameçon. Un hameçon ne doit pas dépasser l’appât,
leurre ou combinaison appât / leurre, de plus d’une longueur de
l’hameçon. Toute demande de record doit être accompagnée d’une
photographie ou d’un croquis du montage des hameçons.
2. Les hameçons multiples sont autorisés s’ils sont solidaires des
leurres artificiels pour lesquels ils ont été spécialement conçus. Ces
hameçons doivent pouvoir se balancer librement et seront limités à un
maximum de trois hameçons (soit simple, double ou triple, ou une
combinaison des trois). Les appâts ne peuvent pas être utilisés avec les
hameçons multiples. Une photographie ou croquis des leurres doit
accompagner les demandes de records.
3. Assist hooks (le terme « assist » est celui utilisé par les pêcheurs
français. Il s’agit des hameçons reliés aux leurres par une attache
(monofilament, multifilament, fil de métal ou autres) – voir dessins).
Pour l’utilisation des « assist hooks » sur un leurre artificiel quel qu’il
soit, à l’exception des leurres à jupes, l’attache ne peut pas être
supérieure à 1 ½ fois la longueur de l’hameçon, et la courbure de
l’hameçon ne doit pas être à plus de 4 pouces (101mm) du plus proche
point d’attache au leurre. Les hameçons doubles et triples ne sont pas
autorisés.